Search results for query: *

  1. A

    Anyone with a tvs gen 2 need help.

    Thanks, so this is ok like this? I can hook the vacuum hose up to this open fitting? As for catch can, I purchased the upr.
  2. A

    Anyone with a tvs gen 2 need help.

    I’m in the process of installing a vmp gen 2 kit from a 2015 mustang on my 2011. The person I bought the kit from was running breathers. After looking at the install instructions I’m not sure where to connect the vacuum tube. I’ve looked and looked at pictures online of various setups and...
  3. A

    Lots of oil around dip stick tube.

    It pools at the bottom, there is a screw for the valve cover almost directly beneath the dipstick. That is where I'm seeing the oil. The dip stick is completely seated, I was thinking maybe the o ring around the dip stick.
  4. A

    Lots of oil around dip stick tube.

    Change my oil recently, today I checked my oil level and there was quite a bit of oil around the dip stick tube. Also, was a little less than a quart low. No smoke, runs and drives fine. No new noises. Mods are CJ setup, long tubes, xpipe. I'm thinking the worst already but hopefully...
  5. A

    Cobra jet purge valve relocation

    Hi. Before I'm told to hit the search button I just want to say I've been searching and googling this for the last few days. I've installed the cobra jet manifold on my 2011 gt. I have the LMR hose kit I bought for $10. I've deduced I'm supposed to take the stock purge valve off the stock...
  6. A

    Anyone replace their own radiator?

    Maybe the question I should ask is if the front bumper has to come off?
  7. A

    Anyone replace their own radiator?

    Did you remove the condenser as well?
  8. A

    Anyone replace their own radiator?

    It's a 2011. I'm referring to the top bolts that attach the condenser to the radiator.
  9. A

    Anyone replace their own radiator?

    I was in the process but ran into a small obstacle. The two top bolts that hold the radiator are inaccessible. Does the ac condenser have to come out also? Any help would be greatly appreciated! Thanks in advance.
  10. A

    Any strut tower bars that clear cj intake manifold without modification

    Thanks for the replies folks, and Greg I see the picture in your avatar but it's small. Do you have better pics of your engine bay? Don't mean to be a pain. Thanks.
  11. A

    Any strut tower bars that clear cj intake manifold without modification

    Hmm, so you didn't drop your motor or have to use washers for the bar to clear? How close was the fit? If the engine moved around would it make contact with the bar? Thanks.
  12. A

    Any strut tower bars that clear cj intake manifold without modification

    Anyone know of any strut tower bars that will clear CJ intake mani without modifications?
  13. A

    Knocking on passenger side valve cover.

    Yeah that's def the ac belt. Mine did the same thing, sounded like a rod knock you could even feel it if you out your hand on the valve cover.
  14. A

    Have a whining MT82? Take it in!

    Yeah, it's a bitch having to make another appointment and arranging for someone to follow me to drop off my car.
  15. A

    Have a whining MT82? Take it in!

    Just got my car back from the dealer with the new trans in it. The shifter is really nice and crisp, best of all the annoying whining is gone. Only thing is now the motor for the drivers side power seat went bad now. One thing after the next with this car.
  16. A

    Have a whining MT82? Take it in!

    Sholzer, that's how my car sounded but louder. It was more noticeable with the windows up and sounded like it had supercharger whine. Also, the dealer called me today after having my car for a few weeks and said they got approved from ford engineering to give me a brand new trans instead of...
  17. A

    Have a whining MT82? Take it in!

    Just took mine in and they are rebuilding the tranny on it. They said the fluid looked good and no metal shavings like they were expecting. But mine whined pretty bad, sounded like a blower. Either way they ordered up the new parts and are doing the right thing. I've gotta say its all about...
  18. A

    2013 mustang gt tick

    The tsb for the tensioner has been out since at least 1 year. My car has a tick between 2-3 k rpm's, only does it once motors warmed up and its worst after oil changes etc. No loss of power, engine runs ok, and no cels. I really doubt ford knew what it was when they were replacing people's...
  19. A

    2013 mustang gt tick

    Yeah that's the noise that's fixed by one of the tsb's that's out. That would be the tensioner tsb for the driver's side head.
  20. A

    Have a whining MT82? Take it in!

    Lol, I've got gear whine too. Damn, I got a lemon!
  21. A

    Third oil change, tick came back after being gone.

    This engine certainly makes sounds/noises that are considered normal OHC internal combustion engine sounds, like the injector tick etc. The noise I speak of is not normal, or normal sounding. I can drive down the street and my neighbors from a few houses away who knows nothing about cars asks...
  22. A

    Third oil change, tick came back after being gone.

    Little update, after going back and forth to several dealers and we recently moved so this issue got put on the back burner until now and having no results. First they tried telling me its a normal engine characteristic, then they're saying engineering knows about it and are working on a fix...
  23. A

    Third oil change, tick came back after being gone.

    I've had that tsb done. The issue is it specifies the tensioner for the driver's side and the noise on my car is coming from the passenger side. I also had the timing cover replaced which is another tsb.
  24. A

    Third oil change, tick came back after being gone.

    CID did ford or anyone ever tell you what the cause or your engine noise was?
  25. A

    Third oil change, tick came back after being gone.

    Well, after taking the car back to the dealer and having to take a day off to replicate the noise for the tech and them acknowledging it they gave me back the car today saying the noise is normal. They claim a customer's car was in the shop and it made the same noise from the same side. I...

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Sponsor Links

Banner image
Back
Top