Search results for query: *

Posting this for a friend. He is located in Clarksburg WV. 2006 Ford Mustang GT Automatic Leather Shaker System Windveil Blue 12,600 original miles. Asking $15,900 As you can see the car is in like new condition and has been garage kept since new. This is a one owner car. Can text or call...

3v harness off of 05 GT. Number 7 COP connector missing and oil temp sensor missing. Asking 200 shipped or will part out connectors for $10-20 each. Price will depend on how many are purchased and which ones. Gt500 heat to exchanger off 2011 with 30k miles Rear main cover $10+ shipping...

Can anyone help me out here? Car is giving me Check charging system, low oil pressure, low brake fluid, fuel level failure, check traction control all on start up and won't go away. Was just getting check charging system and then randomly all the others came up at the same time. Just dropped a...

Needing the factory 05-09 PCV lines if anyone has any laying around since they've upgraded. Need the drivers side to intake manifold and passenger to Intake tube. Thanks!

Looking for stock 4.6 Short block or long block. If long block, preferably 05 or 06. Mileage is not much of an issue. Looking to spend $500 for shortblock or $1500 for longblock. Located in Knoxville, TN. Let me know what youve got! Even willing to trade low mile Aluminum 4.6 block out of an 05...

The car is a 2005 Mustang GT premium with approximately 112k miles on it. The car is being sold as a roller. All the buyer would need if they wanted to go back with a stock motor is a stock fuel hat and a factory long block and clutch. The car will come with the PS set up, AC still charged...

Selling some H Beam Rods with ARP2000 bolts. They have 3000 miles on them and have been torqued twice. On them now are Mahle Flat Top pistons. These are 4032 material stock 3.552 bore and will give 11:1 compression. The pistons have 900 miles on them. I will sell the combo for $600 shipped. I...

Moroso powder coated power steering reservoir. Purchased from lethal already coated. $75 shipped. Some wear on Mount. JLT Gen 3 CAI. One tab missing on heat shield. Still secures well. $100 shipped Koni yellow shocks and struts with H&R supersport springs. Can update pic if needed...

Okay guys, so Im having excessive blowby with my new motor. Zero smoking out of the exhaust. Im doing a leak down test once I get the damn 16mm adapter in (FU Ford for that one). Im considering selling the car once I figure out what is wrong. I just bought a house and could use the cash more...

Hood insert from 2011 GT500. nothing wrong with it. Still has all clips and bolt. $50 + shipping Heat exchanger and overflow container from 2011 GT500 3x,000 miles on it. Comes with everything you see. $125+ shipping JBA OR X for shorties and factory manifolds. X was supposed to fit...

These are brand new CP/Saleen pistons. These are the same ones used in the Saleen 302E cars. The pistons are .002 over stock and should be used on a block with low miles. They are 2618 material and would be great for a boosted or nitrous built motor. They also are stock compression of about...

Anyone know how to safely remove lockouts from phasers or want to trade some low mile phasers with limiters?

SOLD These are used Manley flat top pistons for a .030 over 4.6. Made of 2618 aluminum. These will give you a little over 11:1 compression with stock 3v heads. There was light PTV contact which is pictured but shouldn't affect the strength of the piston since no material is missing. I have...

Anybody tried these yet? I know they are kind of expensive but just saw them on Engine Power show this morning. Im sure they have to be better than the Brisk plugs. Id like to see how they do...

I am looking for a used Fuel Pump Driver Module for a 2005 Mustang. Let me know what you have. Im looking to spend about $35 or so. Thanks

Listing the rods and pistons out of my car. No spun bearings, skirt wear seems to be minimal. All have 2000 miles on them. Manley Flat top pistons .030 over for any 4.6 motor. Puts you a little over 11:1 compression with stock 3v heads. Attached are H beam rods purchased from a Machine shop on...

So I have decided to go a new direction with the car since all of the issues I have been having. Here is a rundown of the plans so far: F150 Coyote Motor <60k miles (don't have exact motor yet) Mustang Intake Cams Boss Intake Manifold JLT Cold Air Intake Long tube headers and offroad x pipe...

First off I'm listing my Piano Black Forgestar CF5 18X9 and 18x10, deep concave in the rear. Wheels are in pristine shape. Wheels and tires have about 3500 miles on them. They come with 255/45/18 in the front and 285/40/18 in the rear. Fronts are at about 70% tread and rear are about 40% if I...

I'm looking to get an enclosed car hauler next spring. I saw Paul's new one that he purchased. Right now I am looking at a 32 ft gooseneck with a 24' floor and 8' riser. Here's what it looks like. Pretty basic with a few options. I'd like the gooseneck to possibly use the riser as sleeping...

Okay so my set up is 3 GT supercar pumps in an older FORE hat with a -8an feed and return. I'm using an aeromotive regulator and rails with a no name filter with a 100 micron stainless filter with E85. Also using a FORE FC3i controller with the 3rd pump coming on with the boost controller. I've...

Two phasers with livernois lockouts installed. New cams I bought came with phasers and lockouts already installed. $100 shipped Brand new Ford fan resister. Paid $73 with tax. Will take $50 shipped. Both items are for 2005 mustang but should fit up to 2010.

I just got my car back together and drove it today. Well it got to operating temp and all was well but about 20 minutes of driving later coolant was spraying out of the coolant overflow tank. Now at operating temp the coolant is boiling out of the overflow. Even with the cap off it does this...

I have a 2005 GT and am putting a new 2013 GT500 oil pan set up on it and wondered if anyone knew if you could run the car without that sensor? If I would put one less hole in the pan Id like to.

Im needing a few odds and ends for my build. Will this listed heater tube nipple fit my 05? http://www.latemodelrestoration.com/item/LRS-8555A/99-04-Mustang-46L-2V-Heater-Tube-Nipple Also does anyone have an oil level sensor for an 05-06? Or can I turn It off in the tune somehow so it doesn't...

Does anyone know how to test the Hydraulic lash adjusters in these cars? I have 2 full used sets and wanted to test to see which were the best ones to use in the car. The only info I found online was that if they are firm they are good when filled with oil; however, it didnt seem too definite. I...