Search results for query: *

Hey everyone. So I'm "trying" to install koni adjustable yellows with steeda springs and upper strut mounts. I read a bunch of threads that said instead of a spring compressor tool just put a jack under the a arm, undo the bolts above and gently lower it down. I did that and it worked perfectly...

I've had this loud whirring sound coming from the rear end for a while. It starts at about 10mph and continues all the way up to whatever speed I go. At first I just thought it was noise from my new tires as they have a reputation for making noise. Well today I put the rear axle up on jacks and...

I've got a 2006 gt. It hasn't been running right since I put the cams in (throws a cam pos sensor code, missfire #8 cyl, etc) Well I took it into the dealership to have them check the car for bad sensors etc, it turns out, the problem was the alternator. It worked find but some diodes were bad...

I installed frpp hotrod cams, cmcv plates, new oem spark plugs and elec water pump. I got that code from the other thread thrown twice when the car started bucking bad at low rpms but since i've had a week of everything running fine, then I got a new code thrown at me today. I was just...

I think it's just coincidence but ever since I installed my hotrod cams,cmcv delete plates and elec water pump there's been this fairly loud random clicking sound. The catch is it stops completely once I push the clutch all the way in. The clutch still seems to work perfectly fine driving around...

Not too sure what to look for. Yesterday I had it in 1st at low rpm and it started bucking bad then the engine light came on and it threw a p0340 cam pos s cir er 1 s1. Then today I had it at low rpm in 3rd gear and same bucking and same code with the addition of p0344 cam pos s cir...

I'm putting in hotrod cams in my 06 but to start I need to align the crank pulley with the spoke at 1200 and the timing mark indentation at 1300. The only problem is my crank pulley doesn't have spokes, and there is no timing mark indentation. Atleast not that I could see. Anyone know how I'm...

The only write-up I can find is with a guy wiring it up to switches inside the car as well so I'm a bit confused. I got the water pump with relay kit. I just want to wire it up the usual way. No extra switches etc. I have the 2 black grounds going to a ground, the orange constant 12v power...

Just had this code come up today. It says it's a 02 sensor slow response code. Whatever that means. Was just wondering if someone could shed some light on this for me. FYI I have NO cats and supposidly the rear 02 sensors are turned off in the tune? Maybe one of the sensors is dirty? I'm...

I tried searching but found just threads on people asking about power gains etc. I saw one where a guy mentioned something about a new belt but it wasn't definitive. :thud: I have a couple questions: 1. I want to get the water pump with relay kit but I already have the steeda UD pulleys on...

I already have a cai with 95mm maf housing(WMS), steeda UD pulleys, 1 3/4" lt headers/full 3" exhaust (no cats), 4:10's, alum d/s, mgw, full suspension, etc. I am planning on getting the frpp hot rod cams and steeda cmcv delete plates. I was wondering what if anything I should do. (keeping in...

I'm FINALLY installing my complete stainless works exhaust, bmr k-member with motor mounts, che ds safety loop, and if the headers clearance the che k-member brace with tq eliminators. Anyway, I'm starting re-assembly and the header install guide says to tq the steering rack bolts, and motor...

Anyone had this happen to them? I was chatting with another local 05 gt owner the other day and he said he plugged in his diablosport predator to return his ecm to stock. He said he followed the directions and it said it loaded the tune but when he went to try and start the car it wouldn't do...

I've been thinking about what tranny I want to go with once I get blown. (or maybe before might be the right order? :laughlots:) anyway. I e-mailed mgw and asked if they were going to make a shifter for the tr6060 because I wasn't sure If I could handle swapping trannies and having to lose the...

I was browsing some suspension threads and I was just wondering something. Has anyone figured out why MM hasn't bothered to really do squat for the s197 platform? I mean even if you gave em 2 years for r&d/engineering and 2 years for testing they should have had a full lineup by last year. With...

I'm thinking of getting a set of mt et street 305/35/18's for my 10" rims. Their website says 10-12" is approved with 11 of course being optimal. I was wondering if you guys think I would have any problems running those on my 10" with only 18-20 psi. I did it on my 305/45/18's but 10" is the...

I've got frpp shorties, frpp x-pipe (doesnt touch cats), and flowmaster mufflers. I really like the sound but have been craving something louder and with more power gains for now while I'm na and in the future when I get blown. I ordered a complete header to muffler kit from...

How much brake fluid do I need to flush the system of stock fluid and change the front rotors,pads all around, and ss brake lines? I have 2, 17 oz(500ml) bottles of aftermarket brake fluid. Will that be enough?

I was just gonna pay a shop to do the work but if it's not a real pain in the ass I'd like to do it myself. I plan on - switching the the front rotors out - swapping the pads with hawk ones on all 4 corners - installing earls ss lines - possibly paint the calipers Any tools/suggestions/tips...

I had my 40k servicing done today and they said they found blueing and some heat cracks on my front rotors. I already have earl ss lines, hawk hps pads, and a better brake fluid on the way. I was wondering if there is a direct oem replacement rotor that will hold up better. I don't care about it...

This guy's a serious pro and he goes into detail in this thread about the tools he uses, the exact steps, waxes, cleaners, polishes, everything. VERY informative on how to get your beauty sparkling. http://www.mustangworld.com/forums/showthread.php?t=534566

I thought I'd see if I would be able to take a vid of a run. One time I was able to duct tape my camera to the dash but it didn't want to stick this time so I had to hold it. Damn hard to do lol. Not much to see but I made it more for the guys that wanted to hear my exhaust redlined...

I don't really know what you would call them but I've seen a couple advertised, you know they stick on your windshield and can give you 0-60mph, 1/4 mile times, lateral g's etc. Anyone have one or know anything about them? (brands, quality, etc) The nearest track to me is a 2 hour drive away so...

I'm looking for a good claybar/wax system. Anyone have any suggestions?