Search results for query: *

  • Users: klaw
  • Order by date
  1. klaw

    When do you get your car back out?

    Got the car out 10 days ago in Calgary. Couldn’t wait anymore.
  2. klaw

    Anyone with 127550 cams only ? Need advice

    Yes. I called Whipple and explained my situation and they sent me a bypass actuator that doesn’t snap shut at low vacuum. It made a huge difference and made the car tuneable. I also have a TR-6060 trans and 373 gears. It still takes a bit of practice to launch. You have to give it a bit of...
  3. klaw

    Which clutch do I want/need?

    General cruising, occasional "spirited" street duty and a few drag passes on the RST with street tires. It let go on the strip and I limped it home. Since I installed the RXT I've upped the boost and also run DR's on the rear and the RXT holds no problem.
  4. klaw

    Which clutch do I want/need?

    McLeod flywheel and RXT hands down. Mine's a Whipple stroker 3V (629 WHP) and the RST didn't last very long at all. No issues with the RXT.
  5. klaw

    Air fuel ratio up about 1 point

    Any chance it's the O2 sensor?
  6. klaw

    2008 ford mustang ambiant air temp sensor?

    Is the calculated ambient used for anything in the tune?
  7. klaw

    RXT Clutch?

    Not since I roasted my RST on the first pass up there a few years ago. Been working crazy hours - haven't started my mustang in over a month - only three times since last September. Are you going to Street Machine Weekend this year?
  8. klaw

    RXT Clutch?

    My RST didn't last very long but it was during the period McLeod was having issues with those. I swapped it for an RXT and would never consider anything else. I'm mostly street - even rush hour traffic at times.
  9. klaw

    Coyote Powered FFR '33 Hot Rod Build

    Some additional video of the first strip outing complete with fullscreen in-car views. vlWku1R-7HM
  10. klaw

    WTB Autolite HT0 or Brisk for 2006 GT with supercharger.

    I use Brisk in mine - they have the regular J-straps and are much easier to gap.
  11. klaw

    Coyote Powered FFR '33 Hot Rod Build

    EaaOYeYw-2I
  12. klaw

    Coyote Powered FFR '33 Hot Rod Build

    Spent the weekend at the drag strip with the '33 hotrod. First time out on the strip and it ran a best ET of 11:65 and pretty consistent 1.60 60's. DA was something like 4000. No issues mechanically. We got about 20 runs in. With a bit of suspension work and a custom exhaust this car has a bit...
  13. klaw

    Coyote Powered FFR '33 Hot Rod Build

    The color is Dodge inferno red. Another night shot: A still shot from the road course school. Freezing rain/snow made the conditions less than ideal for the first performance shakedown but driver and vehicle survived intact!
  14. klaw

    Bad Sellers

    Holy fuck this shit has been going on for a long time over $75. Sometimes shit happens with brand new parts. Sportinawoody you're modifying a car and its not always going to go totally smoothly. It sucks but you were the last guy to touch that injector and it's fucked up now. There's no way to...
  15. klaw

    Early GT500 clutch setup. How much does it hold?

    There were lots of issues with the early GT500 clutches. Just about everyone local to me has settled on the MacLeod RXT twin disk for S197 supercharged GT's and GT500's. The downtime and PITA of clutch changes in these cars is not worth the cost savings of cobbling something together IMHO.
  16. klaw

    Coyote Powered FFR '33 Hot Rod Build

    The car build is finished. My brother and I painted it in March and the final reassembly had it ready for the Spring Thaw car show on April 27th. The video at the end is some in-car from it's first road course test in early May on a very cold, wet, snowy spring day in Edmonton. Next weekend we...
  17. klaw

    Someone please talk me out of this.

    Mystichrome is a PPG product (Harlequin series). My buddy has a mystichrome termi and I painted the underside of his hood a few years ago. Materials alone were over $500 at the time and that was before most shops here have converted over to waterborne systems. I'm not even sure if that code is...
  18. klaw

    Livernois Phaser Limiters....Anyone use them?

    I've had them in since 2008 - no issues.
  19. klaw

    Just wanted to share my mustang

    Rated is one thing - experience is another. My car is 629 RWHP and the RST didn't hold it. On the other hand I love the RXT and it holds well. Other local cars have had similar experiences. The local Terminator guys seem to have better luck with the RST over 500HP but the S197's here don't. I'm...
  20. klaw

    Just wanted to share my mustang

    Nice project. The local experience around here with high horsepower S197's is that the RST struggles. I went through one very quickly myself but have had very good luck with the RXT.
  21. klaw

    What are my options?

    I know a local Calgary gal that wants to go FI on her 07 CS. Perhaps you could work out a deal and swap parts over. PM me if you're interested.
  22. klaw

    Bad Sellers

    https://www.facebook.com/jason.watts.3591
  23. klaw

    Bad Sellers

    He mentioned that he was from Alberta, Canada. That's my neck of the woods if anyone can get more specific details.
  24. klaw

    Street/strip Drag Race Guys "what's in your rearend?"

    Seriously??? This isn't thievery in your books? :wtf:
  25. klaw

    Coyote Powered FFR '33 Hot Rod Build

    I can see that being a future mod. :naughty1:
Back
Top