Search results for query: *

I need a roush 05-09 black bumper preferred or maybe a stock black bumper. I'm near Atlanta. What do you have ? Thanks

Please watch this video. It shows how my belt is moving under load. I think my power steering pulley is the root cause. I read a few posts about how to align the pulley but I can't seem to get it right. Blower is a Kenne Bell Mammoth. I am wondering what to expect. Should the belt not move...

I was breaking Kenne bell belts last weekend at the trac due to a bent waterpump shaft. In the process of all that fun I also broke an AC line. Is this repairable or am I in need of an entire assembly? This is under the car where the line exits the AC pump and attaches to the radiator brackets.

I just had a shop install a detroit truetrac. Took her to the trac and after 4 passes I had one tire spinning during the burnout and one that did not. I I started to first notice the car was pulling to the right when I launched her and I just thought that was odd but I have changed a lot of...

I'm having belt breakage issues with my Kenne Bell and thumper II idler. Today at the track a belt broke and got into my drivers side timing phaser sensor harness. The two wires going into the harness was cut. Not knowing the sensor was cut I limped back to the pits. I pulled out a spare belt...

I picked this up used. Do I reuse the factory bolts? Also I see there are two mounting holes where the uca mounts to the body bracket. Any advantages one over the other? Thanks --- I am here: http://maps.google.com/maps?ll=33.696271,-84.704341

QA1s single adjustable Cobra Jet springs BMR spherical bushing Need delivered to 30135 by Wednesday Sept 14th. Let me know what you have. Pulling trigger on this stuff asap. Thanks

Curious what's the deal on Summit racing not returning tires that have been mounted before? I have some 325/50/15s Mickey thompson et Streets that I just picked up. It's going to be a close fit weather or not they will suck into the wheel wells but without mounting one of them on a RIM I may...

Has anyone installed a set of the R series CJ springs that lower the rear 2.5"? M-5300-R DRAG RACE SPRING SET - IMPROVED STANCE lower the s197 2.5". M-5300-Q are the standard issue CJ springs that lower the s197 about a 1". If so were there any issues with the ride on the street?, Any...

I'm in need of a new set of ET Street radials. I have the 275/60/15s which are 28" tall. With the KB Mammoth (I did have a paxton), 790rwhp 5sp manual and all the torque I can handle I have been seriously considering going up to the 30" ET Street to lower my drive out gear ratio and up my...

I have a black 06 so willing to pay cash for a swap or outright buy if your looking to change up your hood. Thanks

Was a demo phone. Almost perfect. 16gb. Att. Missing earbuds.

Selling a few parts left over from my build. The tank was used by another member and I purchased it but ended up converting to the mammoth blower. Canton tank http://www.cantonracingproducts.com/cgi-bin/commerce.cgi?preadd=action&key=80-239 Tank is in good condition with a few rub marks that...

I have had a floating idle problem for a while and my tuner can't seem to solve it. Let me describe it. It always happens in traffic. When I am in bumper to bumper traffic and depress the clutch and slowly coast to a stop the idle floats from 500 to 1500 until I come to a complete stop and...

Price lowered. I see these sell retail less than i was asking. I ended up going with a stage 3 head which the original owner had titanium retainers and comp springs so i dont need these NEW PAC springs. These springs are pac pn 1233 drop ins and dont require new retainers. $250 plus $15...

So if you followed my build thread I just wrapped a Kenne Bell build on a 302 stroker putting down 750 rwhp and 600ft/torque. Current tire is the MT 275/60-15 28" tall MT ET street on a 4.10 gear. I am leaning towards moving up to the 315/60-15 30" tire on the same 4.10 gear to help bring...

So your about to spin the crank for the first time on a very expensive and extremely long build and your spun up tight. For those that have been there done that...what's a few of the things to double check before I fire it up? Full of oil SC oil, Check Water, check Fuel, double check...

still working on my 302 stroker build and need some help before I get too far ahead of myself. Topic: Lash measurement, shims etc. My new PP heads have manley 1mm overside valves, new bullit cams and I started measuring for lash clearances. Here is the process I took so let me know if I...

I was looking over several posts about upgrading the wiring on a KB BAP. I got that it's wise to run a dedicated wire and bosch relay (40 amp) from the battery to the BAP. In my case I have 2 separate BAPs feeding two FORD GT pumps in a fore hat and I read a few posts about running the same...

With my build going in (thread here http://www.s197forum.com/forum/showthread.php?t=55337&highlight=paxton ) I have a few questions if someone has a minute to answer. 1. I was working on removing the water pump valley tube and it's stuck in the block. Is there some magic way to remove it...

FORD Part number is 7r3z8286c or motorcraft KM-4909. ford cant get it to me to next Friday at best. Anyone happen to have one left over from a build? It's the one with the tstat in the upper coolant cross over location. Has a 3 way manifold with 3 hoses branching out of it. Thanks

New in box. Purchased late December from GEFracing. $500 shipped OBO. or pickup near Atlanta, Ga.

Paxton 2200 High Ootput kit for sale with xtras Price is SHIPPED SOLD .. I would like to sell soon to help pay for my Kenne Bell Paxton Novi 2200 High Output kit (air to air system) polished (about 15k miles on system) This is the self lubricatinglusystem. Dont have to plumb into the oil pan...

Considering my options on going return style and I would appreciate any opinions on the board on the subject of converting a FORE tripple pump. I picked up this FORE returnless hat. It has a 1/2" plug in the top of the hat. Since there isnt native support for a return style setup with this hat...

Up for sale is a set of black Roush parts. Scoop/louvers paint job isn't the best (passes 5 foot test) and is missing the hood template but I bet roush will send you a copy or another s197 member may have one. Hardware kit is new. Selling cheap..less than unpainted parts. $110 shipped...