Search results for query: *

  • Users: chair
  • Order by date
  1. C

    front sway bar end links

    i had the same problem and just switched to the nylon lock nuts and havent had a problem since. i used to have to retighten them about once a month and eventually figured the constant movement loosened the nuts.
  2. C

    Cheap Ebay Brembos?

    wow thats pretty dang cheap. already got brembos but still curious on these
  3. C

    Exedy clutch with stock flywheel

    im using same exedy 400 with stock flywheel. also got a dorman TOB and still running after 15k miles. i cheaped out on the TOB the first time and it blew out at 500 miles.
  4. C

    Need help with smog! (CALIFORNIA)

    i passed smog with an OR pipe in california. i just cleared the MIL lamp and drove the car nonstop until all the monitors passed and drove straight to the smog place before the MIL light triggered again. i bought the car with an OR pipe and the rear O2 sensors werent turned off so this was my...
  5. C

    clutch problems

    Fluid was the first thing i checked but nothing on floor and master cylinder was still full days later. ill have to lift the car and check to confirm if its a hydraulic issue. The pedal felt firm the entire time leading up the problem. I did notice something strange when i started the car a...
  6. C

    clutch problems

    I replaced the slave cylinder when i blew out the clutch the first time. brand new clutch and it was a valero kit. I got the kit for cheap since i had intentions of eventually getting a stage 2 kit. im guessing its a combination of everything. The original kit was bought spur of the moment...
  7. C

    clutch problems

    hmm. Flywheel was resurfaced but i never thought of the input shaft being bent or warped. i guess this a good excuse to get a 6 speed haa.
  8. C

    clutch problems

    I must have bad luck with clutches or im just a bad driver. Ive had my transmission out 3 times this year fixing clutch related issues. The stock clutch finally gave out at 130,000 miles and blew to pieces. I replaced everything (clutch kit, throwout bearing, pilot bearing) with all oem parts...
  9. C

    3650 rebuild

    very interested in this as well
  10. C

    High Mileage Reliability?

    Mine has 146,000 and engine runs perfect. Only issues ive had are blowing clutches and a coolant leak under the intake manifold. The blinkers is probably because you have a tail light out; same thing happened to me. The high rpm is called rev hang which usually happens after the battery is...
  11. C

    Failed emissions test - monitors not ready

    I live in la as well. You're welcome to borrow it if you want to meet somewhere
  12. C

    Failed emissions test - monitors not ready

    where abouts in california are you located. i got a spare stock intake i could let you borrow. i had the same problem and the rear o2s were turned off and had to return to stock.
  13. C

    Coolant Leak Help

    ^ ditto. same thing happened. ford sells the hose as one for $150. but just bought some clamps, hose and a plastic elbow for like 7$ and works perfectly.
  14. C

    Parnelli Jones rear body kit

    the exhaust opening is bigger too so you can run different tips
  15. C

    Radio illumination wire

    i might be wrong, but you would probably have to splice it into the dimmer dial next to the headlight switch.
  16. C

    silly question

    did you use a scanner? most of the time a scan tool will give you information like : P0153: Oxygen Sensor Circuit Slow Response (Bank2, Sensor1) ,indicating the location of the sensor. but most likely that code is 1 of the 2 upstream sensors.
  17. C

    5r55s to TR3650 swap

    Awesome! doing this tranny was a nightmare for me since i had to angle the transmission almost 45* and the tranny jack broke. i should have tilted the engine a bit like you did. now i know!
  18. C

    Marble tumbling noise when idle/neutral?

    yeah mine does the same. Just changed the leaky TOB a couple weeks ago, but for some reason noise goes away if i pump the clutch a couple times at a stoplight so i might have air in the system.
  19. C

    Axle Shaft issue. HELP!!

    Thanks for this, im having the same issue after i hit a curb painted BLACK at night in LA.
  20. C

    Diagnosing front suspension noises

    check your endlinks too. Mine blew out and had no rubber bushings and made a noise over every little bump.
  21. C

    S550 4 Pistons on S197 Car

    Definitely awesome! Thanks for the info, probably going to go this route for now.
  22. C

    what to do..what to do - smog questions CA

    whats the question? i live in LA area and know a little about smog.
  23. C

    Shouldn't I be throwing codes right now?

    You should have a low circuit voltage code unless the sensors were turned off in a tune. If you bought your car used the previous owner might have turned them off, at least thats what happened with me.
  24. C

    DIY Steering wheel Removal & Install

    very nice. simple and easy thank you.

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Sponsor Links

Banner image
Back
Top