Search results for query: *

I thought I would start a project thread tracking our journey in building our first new house. Our family just expanded again to a total of five (I am late getting a thread started about that too :lol:) and have outgrown our first home. We've tried to build for about the last year and a half...

We are finally moving forward to build our first new home. We have been trying to sell our current home for over a year, without any luck. We live in one of the historic districts near our city center. My particular neighborhood was home to the Wright brothers, and several of their bike shops...

http://www.stangtv.com/tech-stories/engine/stangtv-exclusive-under-the-hood-of-the-2015-mustang-gt/

My Dad is the reason I got into cars and Mustangs. He had a bunch of cool cars, various 60's Mustangs, turbo Pinto, and quite a few BOSS's. He had a yellow 69 BOSS 302 with a rare CROSS BOSS intake which he daily drove on slicks which is the only car he had when I was born and I remember going...

More screenshots in the link: http://www.mustang6g.com/forums/showthread.php?t=969

My wife and I signed paperwork to have a new house built! We have our current house to sell still so we are on a contengency contract, but we wanted to lock in the prices as they have been going up a lot lately. We already have a pre-approval from the bank so the only thing to do is get our...

Saw this on Terry's facebook and thought I'd post it up. Congrats brother!!!! I saw him say that he ran an 8.90 after this. Looks like he spun off the line on the backup run. I'm sure he'll be in here with more details when he gets time.

Has anyone seen the weight of the 2013 GT500 engine. I know that the block is supposed to be lighter without the iron liners, I'm trying to compare it to the ZL1 and ZR1 engines.

Looking for a complete stock fuel pump assembly for my car. Pulling the triple pump kit out and I am not sure what I did with my stock assembly.

Looking to sell a set of Corbeau LG1 wide seats. They are black with the micro suede. The seats will include the 05+ Corbeau mounting brackets that have had 1" spacers added to them to improve the seating position and help with visibility. I am looking for $650 plus shipping and PayPal fees...

Every now and then I've seen C4's thrown into S197's but it doesn't seem like a very popular swap compared to a 4r70w or TH350/400. Will a properly built c4 or c6 hold up well enough to consider the swap? Thanks in advance.

I noticed that some usernames, including mine, show up as bolded. I've got a hunch that it has something to do with "the club" user group within Vbulletin.

Saw this over on another forum. Not many details yet but here is what was posted:

Ok guys, moving an entire car in this economy sucks so I am going to start making preparations to part the car out. Short Block $3500 Teksid block 0.20 over Kellog 3.75 stroker crank Probe 4340 I-Beam rods Custom CP pistons (9.3 compression) ARP hardware throughout including head studs...

I go out to the track for the first time this year. The only thing I have changed since last year is that I replaced my 15x9 Weld XP wheels with 275/50/15 MT DR's with Racestar 15x10 wheels with 295/55/15 MT DR's. I barely had 200 miles on the tires since I put them on back in June. Nomatter...

I did some datalogging today and the track. Conditions were in the mid 80's today with less than 20% humidity and I saw intake temps from 160 to 200 degrees at the end of a run depending on how much of a cooldown I let the car have. I'm running an F1A with the 12 rib setup, 4.30" pulley, and...

As the title states, I am trying to find out what what size the stock 5.0 injectors are and if the base pressrue has changed. I thought I saw somewhere that the base pressure is now somewhere around 55psi instead of 39 but can't seem to find that thread again. Thanks,

I got a low oil pressure warning light the other day on the factory gauge. Aftermarket gauge shows normal. Where is the ground for the stock relay? I checked the wiring and the plug that goes to the factory sender is only 1 wire so I am unsure where to check the ground at. Thanks,

I'm putting my pride and joy up for sale. I've owned the car since July 05 and the body has 50,100 miles on it as of today. The new motor and blower were installed in Feb 09 and the car has ~1,000 miles on it since the install. Below is what I believe to be a complete list of mods to the car...

Does anyone know what the size of vacuum line I need to go to a Procharger Big Red Race Valve? I am about to order some line from Silicon intakes but I don't know what size. They have 4-10mm sizes.

The time may have come where I need to get out of the car scene for a while and focus on the two little bundles of joy that my wife is due with in Feb. Do you think I'd get the best bang for my buck by parting the car out or trying to sell it whole?

I found a nice little hole in one of my vacuum lines that I think has been contributing to my problems with keeping blower pipes together. I did some quick searching and found some companies that make silicon vacuum lines. Are they any good? What's the best stuff to replace all my vacuum...

Found a nice fuel leak on my car this morning after starting it up. I tracked the leak down to the connection between the #8 fuel line and the fuel rail. I checked to see if everything was tight and it was. Then I had my wife cycle the key while I looked for leaks and I tracked down to where...

I was getting ready to drive my car to work today when I discovered a fuel leak. It appears to be leaking from the connection from my fuel line to the drivers side fuel rail where my main #8 fuel line connects in. I have the full triple pump system from Fore/Lethal. Does anyone know if the...

Anyone know the particulars that it takes to install a TKO600 into an 05+? I know Hurst made a shifter for the swap but I don't know about the clutch hydraulics and I'm assuming my current clutch wouldn't work. My buddy has a couple of spare Pro shifted TKO's around and we were talking about...