Search results for query: *

Looking for an engine harness that's not cut for a 2011-2014 mustang. Also looking for a control pack if anyone has any leads on one for a decent deal.

As title says. I need these two things. If anyone has a line on both or either thatd be great. Picked up a coyote this weekend for my fox and need these two things to wire it

I am about to pick up a stock yote, ecu and engine harness this weekend for a fox project. I found out that the PATS can now be disabled on the stock ECU and I dont need the ford control pack to do the swap. Im wanting to locate all electronics possible into the cab of the car behind the dash...

I looked and I found nothing on the 5.0s. I'm not sure if I just didn't think of the right thing to search or what. My passenger side quarter panel is holding water. I have no idea where its coming from. Does anyone know what it could be? Anyone had this issue?

Detailed image has 25% off lake country products until midnight tomorrow night. So if you need anything it might be the time to buy. No code required

So my mom asked me if my flex would polish a countertop. So I took it out and used some mezerna fg400 to polish out the haze and sf4000 to bring to a gloss. Not too bad I reckon. I was surprised at the results. The only problem i had was not getting the scratches out. After some research i...

I have this used fuel pump, harness, and module from a GT500. This came out of a buddies car a little over a year ago that drag races and he pulled it out to go to a stronger fuel system. Had a few passes made on it and then tore the car down. I bought this from him with intent to supercharge my...

I am getting ready to buy a DA polisher and pads. Im also going to need a backing plate and need to know the recommended size backing plate to get for it. I have read alot on here and have decided to go with the FLEX 3401 DA so ill need to know what to get for that polisher. As far as this is...

I have a friend that is a big car nut and has a 2003 gt that has been down with getting a turbo build. He has been offered a job in Raleigh and is moving Jan 1st. He was wondering what good shops were within a 5 hour of Raleigh that can assist him finishing his ride up. I figured I would ask...

Ive been researching and cant find anything that relates to the same problem. I have been noticing a whine in my trans. All the accounts ive read are either when the car is in gear or when the car is in 1-4 gear most of the time. My problem is when the clutch is pressed in. The trans has a howl...

I have a set of Niche Essen M147 20x10 +40 offset wheels for sale. They are silver in color with a machined face. Front wheels are running 275/35 and Rears are 315/35. Wheels will work a base model car and on Brembo equipped cars with an 8mm spacer. The Wheels are in immaculate condition and...

I wasnt sure if anyone had seen it but they are running a sale right now for 189.99 on the polisher with 3 pads and two free bottles of polish and mirror finish. They are offering a 50.00 rebate on it as well and free shipping but it only lasts today. I think im going to pull the trigger on it...

This is for my buddy's benefit but I'd like to know for future problems. He has a supra that he got re painted a couple months ago. He made the mistake if carrying it up there with his nice wheels on it and they are white. The at got spraye a factory bluish green. There are spots of overspray...

I am trying to get information/tips/hints/tricks just whatever to learn how to detail my car. I am specifically wanting to learn to use a buffer. I have no experience with one whatsoever and I would love to learn to use one so I can keep my car looking good. I was hoping that you GURUS out that...

I just purchased a new car and I want to keep this thing looking good. I did a fairly good job on my last car but I want to prevent scratches from coming up any sooner than they need to. I am going to order from chemical guys so im just needing a little help in the right direction from those who...

I was driving home and I went to stop quickly to keep from running a red light. I had to put moderate braking force down maybe moderate to high. When I hit the brake the car instantly started making a loud vibration noise from the transmission tunnel. The sound is very similar to when you grind...

2014 GT Premium spoiler question and Stripe question I just bought a new 14 gt yesterday. It is a premium package and it has that awful pedestal spoiler. I am wanting to get a GT500 spoiler for the car but Ive seen where all the holes arent filled from the existing spoiler. Are the holes...

http://www.speedhunters.com/2014/04/mustang-turns-50-style/ For your enjoyment

As the title states I have parts from a wrecked 2008 GT that was bought to swap the interior and drivetrain into a foxbody but now I have other plans so Id like to part it out and move it out of my way. The car has always been bone stock from what I can tell since it still had stock exhaust and...

I searched through threads here and I was not able to find anything that seemed like my problem. I have an issue when I start my car on a cold motor the car will lope like it has Hotrod cams in it. It will do this if you try to start the car and drive off immediately. Sometimes it will do it...

I have little scuffs and scratches from bugs and such on my headlights. Is there any way to bring these back to life or is it just a lost cause and better to find some new ones?

I just bought an 07 gt for a parts car. It has the motor, trans, ECU, harness, fuel pump assembly, interior, and other various parts. My question is what transmissions were in them if its an auto ( 5r55 or 4r70w)? Also im wanting to put the motor into a fox so im curious if the harness will even...

Ive searched a good bit and I can never find what Im looking for with this search feature. I am having a problem with my fuel gauge moving past the full mark. It has actually gone in a complete circle at least once and it doesnt reset back to E when the car shuts off. The trip meter also is...

As the title says I would like to buy some stock knuckles for an 05-09 mustang. I'm assuming that the V6 and GT cars have the same knuckles. If anyone has a spare set they would like to sale I'm interested. Just pm me because I might not think to check this thread regularly

I know an older gentleman that has an 08 gt500 with roughly 10000 miles. Nothing wrong with it. He's asking 35000 for the car. Is this a fair price?