2005 block w/arp main studs and forged rotating assmbley

[2mchtoy]

http://s406.photobucket.com/albums/pp147/2mchtoy/?action=view&current=2012-09-09145234.jpg

This block is straight from the machine shop. It had the mains line bored for the arp studs. I have with the block a kellog forged 8 bolt crank with forged manley h beam rods. I have brand new bearings for the mains and rods. And brand new rings for the zollner forged pistons. I can have the rotating assmbley put in the block by my local machine shop for an extra 200 dollars. The roaring assmbley has been balanced and ready for the block. asking 2400.00 for everything listed If serious you can call or text. 641 990 2096 Tom

 

[killswitch06GT]

http://s406.photobucket.com/albums/pp147/2mchtoy/?action=view&current=2012-09-09145234.jpg

This block is straight from the machine shop. It had the mains line bored for the arp studs. I have with the block a kellog forged 8 bolt crank with forged manley h beam rods. I have brand new bearings for the mains and rods. And brand new rings for the zollner forged pistons. I can have the rotating assmbley put in the block by my local machine shop for an extra 200 dollars. The roaring assmbley has been balanced and ready for the block. asking 2400.00 for everything listed If serious you can call or text. 641 990 2096 Tom

still available? How much could this support?

 

[10851stang]

Still have it? Are you willing to ship?

 

[2mchtoy]

Hey guys. the block and forged assembly can handle over 800 to the wheels. so no worries there. I would be willing to ship but at buyers expense.Thanks Tom

 

[killswitch06GT]

Willing to sell RA seperate?

 

[2mchtoy]

Yes. 1100 for the assmbley and 1300 for the block with arp studs. Plus shipping. the assmbley will run right around 54. block would have to be shipped freight and that seems to be around 200. depending on where your at.
Tom

 

[HooDee01]

What's the compression with the pistons with stock heads, and are the rods stock length

 

[degmidget]

so the rotating assembly is used? just new rings and bearings? did u buy a rotating assembly online or piece it together?

 

[2mchtoy]

Sorry guys haven't been on in a bit. I'm not sure where exactly where the compression would be. The assembly is out of my 03 cobra. That's why I'm not sure with the 3v heads. With the 4v heads it's 8:8:1 but the dish is -16 and I had a stroker assembly with -16 and with 3v heads it was 9:5:1.
So the rods are stock length.

 

[2mchtoy]

If serious make some offers!

 

[2mchtoy]

Still have. If not sold in the next two weeks I'm putting together the built long block with cams and springs and so on.

 

[JoshK]

Sell me the cams!

 

[crownaviation]

could not see the pic from your link..

 

[2mchtoy]

That's weird I just clicked on the link and opened right up. I'm sure you'd love those cams. They really work and have an awesome lope.

 

[JoshK]

So, sell the cams seperate?

 

[2mchtoy]

No needs another block and forged set up

 

[2mchtoy]

Ttt one more time then longblock time

 

[2mchtoy]

Drop price to 2000!! For machined block with arp main studs. New bearings and rings. Forged rotating assembly. Balanced and ready to be put together.

 

[2mchtoy]

Block and assembly are spoken for.

 

[crownaviation]

Block and assembly are spoken for.

DAUM! That was a good price on that