2005 GT NOS, NIB Clutch kit and more.

Punishermustang

forum member
Joined
Dec 31, 2010
Posts
161
Reaction score
0
2005 GT NOS Kit, NIB slave cylinder, C&L intake w/ predator tuner

I have to get rid of my car due to Vet bill. I put the motor back to stock and have a few used parts and NIB parts. I'm located in Vacaville, CA and all prices are shipped. Feel free to ask questions and I have more pics upon request. Thanks.

ZEX NOS kit for S197 mustang. I purchased it used and only used it about 20 times. Been installed on the car for several years with no issues. I'd like to sell it complete as a kit. The kit will include C&L aluminum (painted black) intake w/ predator tuner unmarried. The tuner has 3 tunes for the C&L which are 87, 89, 91 octane. The tuner does not have a tune for the NOS. I ran it on the 91 octane tune. I mounted the spray into the C&L so I do not want to separate. They have 100 shot jets. Comes with purge and bottle warmer. The bottle holds 10lbs of NOS. I've never used the bottle warmer but bought it from a member on here. The controller is mounted to a bracket I made that fits on the inner fender well. No switches included and missing one bolt to strap across bottle. Hardware to install is minimal. The bolts with the kit are all I used except a couple factory bolts I had to use for stock intake. I would like $450 OBO.

I will separate the NOS kit from tuner and intake. $350 shipped for NOS kit alone.

Dorman CS650109 Clutch slave cylinder NIB asking $50 shipped. Currently on Ebay

Lastly I have a set of stock fog lights. No bulbs. I bought them used and never mounted them. Asking $30 OBO shipped. They are used and have small pits on the lenses but you can only see it up close. The brackets are broken but usable as seen in pics. Currently on Ebay

Clutch Sold.
Flywheel sold.
 

Attachments

  • IMG_2974.jpg
    IMG_2974.jpg
    487.6 KB · Views: 53
  • IMG_2968.jpg
    IMG_2968.jpg
    431.2 KB · Views: 25
  • IMG_2967.jpg
    IMG_2967.jpg
    489.5 KB · Views: 29
  • IMG_2971.jpg
    IMG_2971.jpg
    481.6 KB · Views: 38
  • IMG_2969.jpg
    IMG_2969.jpg
    459.4 KB · Views: 31
  • IMG_2972.jpg
    IMG_2972.jpg
    486.7 KB · Views: 42
  • IMG_2976.jpg
    IMG_2976.jpg
    486.5 KB · Views: 31
  • IMG_2965.jpg
    IMG_2965.jpg
    488.5 KB · Views: 34
  • IMG_2966.jpg
    IMG_2966.jpg
    428.1 KB · Views: 30
  • IMG_2943.jpg
    IMG_2943.jpg
    490.4 KB · Views: 41
  • IMG_2931.jpg
    IMG_2931.jpg
    487.7 KB · Views: 32
Last edited:

deathwishracer

forum member
Joined
Feb 8, 2014
Posts
254
Reaction score
2
Will u spate the clutch and flywheel? I only need the clutch/pressure plate. Don't need throwout bearing or flywheel.
 

Punishermustang

forum member
Joined
Dec 31, 2010
Posts
161
Reaction score
0
The throw out bearing comes with the Exedy 500 clutch new so I likely won't separate that. But I sent pm's to the first guys with prices. TZreddy your next for the flywheel.
 

Punishermustang

forum member
Joined
Dec 31, 2010
Posts
161
Reaction score
0
Everything is sold except for Intake/Tuner and NOS kit. Trying to sell it all together.
 
Back
Top