20x11 +13 offset. will it work?

[RedfireGT]

Looking at xxr 526 rims in 20x11 with +13 offset.


I dont understand the offset calculators that ive found online so im not sure if the offset is too much or not.

i dont understand that kind of stuff.

 

[Pardue]

The offset is way off, they will stick out a good bit. I would look for wheels with the correct offset. My 20x10 rears are +40 to give you an idea of what the correct offset should be.

 

[RedfireGT]

shit. Those wheels had a 5.25" lip. I want a deep dish wheel with a nice spoke pattern. I had mrr gt1's but i wanted something with a wider pattern between the spokes. I like Klutch sl14's but they dont come in 20s

 

[ford20]

Hey Andrew, you ever thought of the XXR 521's? Not a deep dish but with the little lip on there they look pretty good and they do come in 20's. You are going to have to go with a way less aggressive offset maybe like a +42-+45 in the rear.

 

[csamsh]

check out the forgestar f14f and f15

 

[csamsh]

F15

F14F

You can order your own offsets

 

[warpig12354]

Do you have any pics of the 14f's on an s197?

 

[csamsh]

No I've never seen them on a Mustang. Have seen plenty of F14's though

 

[RedfireGT]

if i had that kind of money for forged wheels id be doing these

Forgeline GA3

or these

ADV 10

i do think that these TSW Jerez look similar to the ADV10 though

 

[cbass]

www.willtheyfit.com will show you how different they are from your current setup. No actual fitment guidelines, but it will give you a rough idea on how much clearance you are going to use up with switching wheels around.

 

[shark tales]

20x11 13? No way. Even with 255 tires and fender pulled to hell it won't work.


Sent from my iPhone using Tapatalk

 

[jayman33]

The F14f's aren't popular for the Mustangs.... most likely due to the cost of these. They're not roll forged but flow formed which is a bit more expensive. I've talked to them quite a bit on these, they'll do them and build custom to a mustang but the lip isn't going to be 5", more like 3". The TSW's are pretty sweet, I have yet to see many S197's with the new TSW wheels yet. You could get ADV1 if you're willing to spend 6-7k on a set of wheels! True forged is a decent alternative and are about half the cost of ADV1.

I'm still a Avant garde fan.

 

[LS1EATINPONY]

if i had that kind of money for forged wheels id be doing these

forgeline ga3

please buy these wheels..... Pretty please!!!!!!!!!

 

[warpig12354]

I called Forgestar and the 14F's in 18x10 is $687 per wheel if I remember correctly.

 

[csamsh]

I called Forgestar and the 14F's in 18x10 is $687 per wheel if I remember correctly.

wow that's quite a bit more than their other wheels. My 18x11 F14's were 350/ea

 

[warpig12354]

The 14F's are multi piece

 

[zeroescape]

I have 20x11 with +55 offset and they come just under the lip of rear fenders. Slighty less than flush.

 

[FR500GT]

A 20x11 on these cars should be around a +53 offset. Here's mine with a 295/35R20 on coilovers with zero rubbing on the rears

 

[peetiewonder]