AMR 19x10 on the front

[KatoS197]

Anyone running a 19x10 square set up in the AMR wheels?

 

[Dubstep Shep]

Isn't there a thread on this already?

 

[KatoS197]

Isn't there a thread on this already?

I did my due diligence in searching. Nothing came up with anyone owning this setup.

I read that they used to be offered in a 19x9.5 and there were center cap issues. Just wondering if that's going to be the case with a x10.

Plus an AM Chat guy told me I'd need to run about a 1" spacer on the fronts?

 

[KatoS197]

FINALLY found a post by going through each thread under "square" search and found a guy running 20x10 AMR's with Brembos and no issues. Thank the Lord Almighty.

 

[V8 Vol]

I have the AMR 19x10 square with 285's......all good, no rubs

 

[KatoS197]

I have the AMR 19x10 square with 285's......all good, no rubs

Awesome!!! Thanks for the confirmation!!!

 

[Gabe]

Yes they'll clear Brembos and they'll fit:

No, there isn't a lot of room between the side of the wheel or the side of the tire and the side of the strut or the stabilizer link stud:

That ^^^ is with a 275/40/19 tire

 

[V8 Vol]

^^ this may be important. I forgot to add I have aftermarket endlinks on my front setup

 

[KatoS197]

^^ this may be important. I forgot to add I have aftermarket endlinks on my front setup

Hmmmm well I'm not sure if that changes anything as far as clearance goes. A guy running 20x10 AMRs said he clears no problem.

 

[mavisky]

20x10 +48mm AMR's with 285/30-20's clearing stock brembos and stock swaybar end link.

It's tight, but it does clear.

 

[KatoS197]

20x10 +48mm AMR's with 285/30-20's clearing stock brembos and stock swaybar end link.

It's tight, but it does clear.

Nice!

 

[csamsh]

Take a bandsaw to the endlink stud. I had to do it to get my 11's to fit up front.

 

[KatoS197]

Hopefully I can avoid that. But hey, gotta do what you gotta do.

 

[aestang22]

Im looking at running a 19x10 with a +45 mm offset in front. anyone know if this will clear with no rubbing?

 

[MustASH]

Don't want to hijack thread but, anyone run square 18x10 10th Anniversary Cobra Style, and does they clear Brembos ?

I want to get a spare set for lapping, 79$ each on AM...

 

[mavisky]

Im looking at running a 19x10 with a +45 mm offset in front. anyone know if this will clear with no rubbing?

That's 3mm more clearance away from the strut body than I have with my +48mm wheels and there is plenty of room between the wheel and the fender for that 3mm and more.

 

[Sharad]

20x10 AMRs square on 14" Baer 6P+ all the way around.

 

[KatoS197]

20x10 AMRs square on 14" Baer 6P+ all the way around.

That's sex. So hard.

 

[mavisky]

Wait, bear 6p+ on the rear? Are those floating calipers?

 

[Sharad]

That's sex. So hard.

Thanks.

Wait, bear 6p+ on the rear? Are those floating calipers?

Yep.