pistol_pete
Banned
- Joined
- Feb 27, 2011
- Posts
- 27
- Reaction score
- 0
Look no further Richmond 6 speed ROD:
http://www.summitracing.com/parts/RMG-7041626AB/?rtype=10
All you need to do is have a custom crossmember made and to use a Quiktime 4.6 to Jerico bell(it fits the ROD too). Custom driveshaft though with a Powerglide 2speed slip yoke. Also a custom way to use the shifter too.
It seems like a good, trouble free alternative to the MT-82 and a higher torque capacity to boot.
http://www.summitracing.com/parts/RMG-7041626AB/?rtype=10
All you need to do is have a custom crossmember made and to use a Quiktime 4.6 to Jerico bell(it fits the ROD too). Custom driveshaft though with a Powerglide 2speed slip yoke. Also a custom way to use the shifter too.
It seems like a good, trouble free alternative to the MT-82 and a higher torque capacity to boot.
