We'll have dyno results and more soon!
$1500? Crap, that mod would go on the fantasy list.
C'mon man, that's the bulk price discount we get on the 5.0's. You've got Detroit Rockers listed in your sig that are $800 for only two. We get four for the low, low price of $1,500. That's a $25/cam discount.
/sarcasm
C'mon man, that's the bulk price discount we get on the 5.0's. You've got Detroit Rockers listed in your sig that are $800 for only two. We get four for the low, low price of $1,500. That's a $25/cam discount.
/sarcasm
I still don't see the phase limiters on their site. Any updates on when they will be available?
Says ships in 6 days at jegs.
http://www.jegs.com/i/Comp-Cams/249/5493/10002/-1?parentProductId=1533859
Man $1500 a set gives me a flashback to the vg30dett days. Maybe the price will go down or someone will do a group buy.
But they do look promising. 40HP on an auto
http://www.youtube.com/watch?v=CQxlJevcE9Q
If you've already added long tube headers and 3.73 (or steeper) gears and are now ready to take the next step, the Stage 3 Cams add big power gains for strong power gains above 5500-7200+.
That was with the stage 3 cams, not impressive to me.
That Brenspeed test is with Stage 1 NSR cams...why would they have stage 3 NSR cams? Either way a peak RWHP gain was 49 HP. Not bad for an auto. Would be 10 to 15 more with an M6. These are more for racing anyway so the power is gained were it counts the most.
Correcting myself here...
Just checked site and they do have stage 3 NSR cams. I would replace the springs and retainers.
Im sure the gains would be huge with a custom grind cam that matched ur mods. Add a little port work to the heads and im sure u can see 550 wheel on 93. Now thats Very impressive if u ask me.
I'm guessing you meant 450?