NoviBlownGT
Boosted Crew
Went to an arm drop street car only even today at my local 1/4mi today. Here is a video of the best run.
http://vid220.photobucket.com/albums/dd20/mxrider443/IMG_1699_zpsngwfcpud.mp4
Paxton 2200 at around 20psi
only suspension mods are bmr billet LCAs and bmr 25mm rear sway bar
front sway bar was removed, stock shocks/struts, steeda sport springs, stock uca, no relos.
6060 trans with 4.10s
295/55-15 ET streets were at 18psi on this pass
1.77 60FT
4.86 330
7.36 1/8th @96.2
9.50 1000ft
11.263 1/4 @130.69
Car is unloading hard, my shocks/struts are to blame I think. It would hook and the front end would drop and it would strart spinning.
Back that run up with an [email protected] with a 1.780 60ft
Think I was getting some blowout though, gonna check gap and maybe tighten it up a bit.
http://vid220.photobucket.com/albums/dd20/mxrider443/IMG_1699_zpsngwfcpud.mp4
Paxton 2200 at around 20psi
only suspension mods are bmr billet LCAs and bmr 25mm rear sway bar
front sway bar was removed, stock shocks/struts, steeda sport springs, stock uca, no relos.
6060 trans with 4.10s
295/55-15 ET streets were at 18psi on this pass
1.77 60FT
4.86 330
7.36 1/8th @96.2
9.50 1000ft
11.263 1/4 @130.69
Car is unloading hard, my shocks/struts are to blame I think. It would hook and the front end would drop and it would strart spinning.
Back that run up with an [email protected] with a 1.780 60ft
Think I was getting some blowout though, gonna check gap and maybe tighten it up a bit.
Last edited:
where's the video?
