Kenne Bell Pulley swap

[URSOSLO]

Righty tighty or lefty loosy on the bolt?

 

[don_w]

Righty tighty or lefty loosy on the bolt?

Yes...

BTW, I use a cheater bar on the end of the allen wrench for a little extra oomph. And I put a dab of anti-sieze on it when it goes back in.

 

[URSOSLO]

Thanks! What is the difference in size between the 9psi pulley and the 10 psi pulley?

 

[don_w]

I haven't seen a "9psi" pulley, but the rule of thumb is 1/4" = 1psi. I have 3 pulleys: 8psi pulley = 4", 10psi = 3.5", and 12psi = 3".

 

[KIMMER]

Don't be uping your boost on me already...lol

 

[maxpayne]

I haven't seen a "9psi" pulley, but the rule of thumb is 1/4" = 1psi. I have 3 pulleys: 8psi pulley = 4", 10psi = 3.5", and 12psi = 3".

Mine came with a 9psi=3 7/8"

 

[don_w]

Mine came with a 9psi=3 7/8"

Probably a difference between the 2.4 and the 2.6 blowers.

BTW, thanks for dredging up a 2007 thread to tell us.

 

[maxpayne]

Probably a difference between the 2.4 and the 2.6 blowers.

BTW, thanks for dredging up a 2007 thread to tell us.

I figured I'll post it in this thread than starting new one just for that.....but thanks for beeing a dick