BMR Tech 2
Kelly's Replacement Lackey
One more thing I haven't mentioned yet: the adjustable panhard bar will soon get replaced by a BMR Watts Link. It's here, I just haven't had a chance to install it yet.
As far as I know Watts Links don't have any adjustability to raise or lower a vehicle, correct?
Also, if I can't center the axle enough so the tires won't rub with the current set-up, I'm not gonna be able to do it with the Watts Link installed either, right?
The WL will not change your ride height it all. It's also true that you won't be able to get the rear centered any better with a watts over a PHB when the car is static, but the WL will keep the rear centered better throughout your entire range of suspension travel.
Just an FYI, the Koni Yellows are only rebound adjustable. Setting them to full stiff does nothing to prevent your tire rub.
This is kind of janky, but I know a lot of guys in the F-body world do a "heater hose mod" to their springs. They'll get some heater hose and push it over the coils to give themselves a little extra lift. You could always try something like that.