ProCharger pcv hose options???

[mustangflanagan]

Because that's what all the cool kids do! Haha

I have the same setup...

Lol do they both catch oil?

My pos is about 5 secs away from being traded in or sold for a 15.

 

[05stroker]

Lol do they both catch oil?

Oil and water, looks like baby shit!

 

[mustangflanagan]

Oil and water, looks like baby shit!

At least mine is doing that, something right i suppose. If it rains one day i have to empty the damn thing asap or it overflows the breather and have all that baby shit all over smh

 

[05stroker]

Does it look like this?

 

[mustangflanagan]

Yup... the fun part is when that shit comes out the filter on the can.

I also think that shit clogs up the drain on the can also though.

 

[05stroker]

Well, at least that shit is not going though your intake!

 

[mustangflanagan]

I assume it only looks like that due to the oil in the can being introduced to the outside weather?

 

[mustangflanagan]

Would using two breather catch cans be more benneficial than 1?

 

[05stroker]

Yes and yes. You wont have to drain as often. The only reason mine looked that bad was fronm a lot of idle time and I was getting water in the oil due to the copper head gaskets I had. Normally it is more clear and I drain mostly water from condensation and not very often.

 

[mustangflanagan]

I am assuming the engine could relieve pressure a little better using 2. How does idling effect anying?

 

[05stroker]

How does idling effect anying?

Lots more condensation.

 

[swflastang05]

Because that's what all the cool kids do! Haha

I have the same setup...

LMFAO

 

[jjjferro]

Are you guys that are running the breather catch cans finding oil in the head unit? That was my main issue when I running the JLT oil separator.

 

[swflastang05]

Are you guys that are running the breather catch cans finding oil in the head unit? That was my main issue when I running the JLT oil separator.

No oil in the head unit or IC, etc..

 

[jjjferro]

No oil in the head unit or IC, etc..

Great thanks. Looks like this is the way to go then.

 

[05stroker]

Are you guys that are running the breather catch cans finding oil in the head unit? That was my main issue when I running the JLT oil separator.

If there is nothing but air to be sucked in, that is all you will find.

 

[jjjferro]

If there is nothing but air to be sucked in, that is all you will find.

Thanks. I was looking at it again and will end up using the Moroso breather catch cans (one on each side) and nothing attached to the intake.

 

[mustangflanagan]

Wtf i believe my pcv. Lines froze. Then backed up my breather catch can pushing oil out the passenger valve cover.

 

[TzReddy]

So will this work? Can I run a hose from passenger and driver side into each port and that be ok?

 

[TzReddy]

Currently just running breathers on each valve cover but I dont like the oil leaking and getting my engine bay dirty