Quick sway bar relocation bracket question..

[scramblr]

I used the BMR with zero problems. Actually my complete rear suspension assy/arms..etc are BMR!! Love them....except for the clunk when i let off the gas.......

If you still have the stock DS, that's probably the clunk you're hearing. If not, then you may want to go back under there and check to see that all the bolts are torqued to specs. May want to also look at the bushings to make sure one isn't split.

 

[CandyRedGT]

I have a Dyno Tech aluminum shaft. Clunk has been there ever since the suspension/arms were changed. Little louder now though.

 

[scramblr]

I have a Dyno Tech aluminum shaft. Clunk has been there ever since the suspension/arms were changed. Little louder now though.

Thinking something is loose. 129ft lb is a lot of tourque.

 

[CandyRedGT]

Thinking something is loose. 129ft lb is a lot of tourque.

^^ Huh?? what is 129 lbs?

 

[scramblr]

Sorry...the LCAs.

 

[CandyRedGT]

Found a bad bushing in the left lower arm, front eye. MAY be from getting hit...dunno

 

[BMR Tech]

Found a bad bushing in the left lower arm, front eye. MAY be from getting hit...dunno

Give me a call sir.

 

[Morris]

Kelly, if I want to use your sway bar bracket with the lower control arm bracket I have to do some mods to that as well......I think. Do you have any instructions for that?