ROUSH, FRPP, and OEM Parts For Sale...

[AutoXRacer]

Trying to purge the garage!!!

All used parts are off a 2008 ROUSH Stage 3 Mustang (Supercharged 4.6L).

VMP Tuning, ROUSH, Ford Racing parts:
-VMP 90mm Cold Air Intake for M90 superchargers; $190 obo

-MRT high-flow catted H-pipe; $400 obo

-ROUSH 2.3L TVS MAF housing and air inlet tube (NEW); $150

-ROUSH 12% over-drive crank pulley; $350 obo

-ROUSH Phase 2 crank pulley set (NEW); $350 obo

-Ford Racing 80LB injector set (qty 8); $300 obo

-Ford Racing complete GT500 Twin 60mm throttle body w/electronics (brand new, never installed); $160 obo

-Steeda double hoop draveshaft safety loop; $200 obo ($267 new) only installed 1 week.

Additional Items:
-Ford OEM crank pulley; $100 obo
-Ford OEM rear disc brake rotors (low miles, less than 5K); $50 obo
-Ford OEM belt tensioner; $25 obo

-Ford OEM 8.8 differential cover, $15
-Ford OEM lower control arms (rear), $50 obo
(OEM = Original Equipment Manufacturer = Genuine Ford Part)

-Complete 4.6L long block that needs full rebuild for sale...$1,000 obo.

-Tremec 5 spd manual transmission with OEM driveshaft; ready to bolt-in and go!! $800 obo

Make me an offer on anything!!! Prices are negotiable!!

 

[Paps]

How many miles on motor and trans?

 

[JoshK]

What is wrong with the engine that it needs a rebuild?

 

[AutoXRacer]

How many miles on motor and trans?

Motor and trans have 64K miles.

 

[AutoXRacer]

What is wrong with the engine that it needs a rebuild?

The thrust bearing failed. The crank needs to be replaced as the bearing surface where the thrust bearing was wore a groove into the crank surface.

 

[stang67]

I am interested in the crank pullies do they spin on together or do you have the spider assembly also

 

[AutoXRacer]

I am interested in the crank pullies do they spin on together or do you have the spider assembly also

Yes, the ones I am selling spin together; its the ROUSH Phase 1 and 2 dual belt crank pulleys. I am not selling the bracket that holds the other pulleys needed to complete the dual belt FEADs though.

I do have the spider assembly, but I am using it on my car.
You can probably buy it since its a 2004 Cobra Ford OEM assembly.

 

[stang67]

So you need a bracket to got In between the balancer. And the pully.

 

[AutoXRacer]

So you need a bracket to got In between the balancer. And the pully.

This is without the bracket:

This is the bracket you need; it has a tensioner and two idler pulleys:

Its the larger of the two brackets:

Plus the dual belt FEADs TVS blower is different from the single belt blower. The snout on the dual belt TVS is much longer.

 

[whippledpony]

Pm sent

 

[1BOSS302]

Does the gt500 throttle body have the plate and the bolts that come with it?

 

[bab312]

throttle body

Hi my brother in law agreed at 115 plus shipping
could u send me the full price and I will send payment via PayPal
thanks

 

[justinsstang]

Oh man. I want that 12% OD and GT500 TB sooo bad. Too broke right now

 

[Mustang259]

How did you like the MRT h pipe and did it require a new tune?

 

[Macman45]

How's the exhaust note with the MRT high flow cats? Much different? I have stock headers and just an axle back, don't wanna ruin the sound.

 

[AutoXRacer]

How did you like the MRT h pipe and did it require a new tune?

No tune required for exhaust mods post headers/exhaust manifolds.

How's the exhaust note with the MRT high flow cats? Much different? I have stock headers and just an axle back, don't wanna ruin the sound.

I loved my MRT H-pipe!! Louder than the stock pipe (slightly louder) and made the exhaust sound deeper!! I think its the best mid-pipe hands down.

I even bought it with an extra bung.

 

[stanger1944]

Is the phase 2 pulley an overdrive pulley? The purpose is to just give more boost right? I am buying a roush m90 and trying to get more info as well.

 

[AutoXRacer]

Is the phase 2 pulley an overdrive pulley? The purpose is to just give more boost right? I am buying a roush m90 and trying to get more info as well.

The Phase 2 pulley is for the 2.3L TVS dual belt version. You cannot use it with the M90 or a single belt 2.3L TVS.

 

[Dubstep Shep]

What're the details on the overdrive pulley?

Made for a single belt system?
Six or eight rib?

 

[AutoXRacer]

What're the details on the overdrive pulley?

Made for a single belt system?
Six or eight rib?

The 12% overdrive pulley sold to Santi in Spain...he may be selling it since he decided to go with a new motor and blower.

The pulley/balancer is a ROUSH OEM 12% OVERDRIVE balancer...replaces the stock balancer/crank pulley. 6 rib made for single belts (M90 and 2.3L TVS) and whatever else works with the stock OEM balancer.