Welcome to my nightmare!! project!!

[blacknlte]

Well kinda LOL more like for any other muscle car out on the road around here!

So hes project KNTMAR!! With all the parts installed looking to make about 650+ rwhp (save tune) and once the billet short block goes in looking for 1000! This will be in full street trim right down to AC and Navi system!! Ill be documenting from start to finish. Stock weight to weight with all parts added, stock horsepower to modified horsepower, and stock 1/4 times to modified times.

Like to thank Matt & Jared at Lethal Performance, John Urist and crew at Hellion, Jermey at UPR, the guys at TRZ Motorsports, and David at Motiva Motorsports for helping out with all the parts, tech info, and count less phone calls!!

O yea, car just now has 500 miles on it!

Hellion GT500 Twin Turbo Kit
Hellion GT500 Aftercooler
Lethal Performance GT500 Triple Pump Return Style Fuel System
Afco GT500 Pro Series Dual Pass Heat Exchanger with Dual Fans
Siemen Deka 80lb USCAR High Impedence Injectors
BMR 05-10 Mustang Tubular K-member with 1/2" Engine Drop
BMR Non-Adjustable A-Arms
BMR 05-06 Mustang GT Front Driveshaft Loop
QA1 Front and rear coilover shock/struts
TRZ full rear suspension
Cobalt 2-1/16" Electric Fuel Pressure Gauge
Cobalt Boost/Vac. Gauge
AEM EUGO Wideband Gauge
Dynotech GT500 3.5" 900hp Aluminum Driveshaft
Moroso Coolant Expansion Tanks
Moroso Battery Box Intercooler Coolant Tank
Moroso Mustang Power Steering Tanks
SOS 07-09 GT500 Center Dash Triple Gauge
UPR Universal Battery Relocation Kit
SCT BA-5000 Slot Style MAF Meter
Lethal Performance off road x-pipe
Magnaflow 3in exhaust
Fore billet rear end cover
WOT Box
Turbo Smart boost controller
Lethal Line lock system

Im sure there is other parts im leaving off

Now for the heart of the nightmare

ModMax 4.6L -17cc Power Adder Dished Pistons
ModMax Stainless Steel Piston Ring Set
Oliver Billet I Beam Rods
Ford Racing 5.4L Forged Steel Crank Shaft
ARP 2000 4.6L/5.4L 2v/4v Head Stud Kit
Clevite 77 Rod Bearings
Clevite 77 Main Bearings
FORD 4.6L V-8 LEFT SIDE 94MM .030 MLS HEAD GASKET
FORD 4.6L V-8 RIGHT SIDE 94MM .030 MLS HEAD GASKET
Comp Cams Performance Beehive Valve Springs
Comp Cams DOHC Steel Retainers
ARP Main Stud Kit 2007+ Shelby GT500 5.4L 4V
Lethal Performance custom cams

PICS

Feels like Christmas with Lethal being Santa LOL

 

[BLKS197]

Grabber Blue? Fully Built Motor? Twin Turbo? Better believe I am subscribing. Best of luck man

 

[Rasmus]

That's one hell of a nice pile of parts.

PS. Your old 4.6 block lives.

 

[Boozshey]

Subscribed

 

[blacknlte]

That's one hell of a nice pile of parts.

PS. Your old 4.6 block lives.

NICE!!

 

[GrnBullitt08]

This is gonna be one hell of a build. Subscribed.

 

[paydirt]

took my breath away seeing all those boxes. shits gonna be so sick!

 

[Airborne2000]

wow, rough guess on the cost of all of this?

 

[bigray327]

$70K?

 

[mikeysgt]

Wow! I'm in too! Sounds like it's going to be a beast! Grabber blue with turbos is my dream gt500

 

[94tbird]

its not together yet? slacker i would have preassembled it all out of the car in excitement and preparation lol

 

[Kankakee]

Any reason you are lowering the engine? Wouldn't this cause more of an issue with the low hanging pipes from the Hellion kit?

 

[dagamore]

nice!

 

[Scott]

Subscribed.

Good luck you are definetly going to have fun!

 

[rford426]

Daaaaaaamn....WOOOD

 

[Bigmike0405]

DO you not have any bills? or just make triple digits? lol

 

[TurboPete]

Yeup , Im keeping an eye on this one. Very Nice .


Pete

 

[STEVEB]

This is going to be one bad a$$ build.

 

[captainN8]

me four.

 

[slow06stang]

Good Luck with the build. Hope everything works out perfect for you. That is going to be a beast.