This is what is taking place with the HT ...
tigerhonaker
Senior Member
Home Threater Up-Date,
One thing that took some time was moving the hospital grade electrical outlets.
That is necessary because all the speakers have new locations.
The Classe' amps with Richard Gray devices to power the speakers obviously had to be moved.
The electrical now is completed.
The front wall where the 123" Stewart screen is now has been completed with electrical & Speakers.
And to be honest it really now looks Awesome.
Very business like !!!
The side JML Utopias remained in their location.
That would have been a major project moving them.
So glad that was not necessary.
Rear wall is what has taken a lot of time.
From the garage which is under the HT they ran the new Transparent 10 gauge cable W/Bricks.
To get it to the right rear JML Mini Utopia they had to cut holes in the drywall.
That allowed them to fish it the rest of the way on the inside of the drywall.
The reason for that is because the rear surrounds are going to now be mounted on Custom Shelves on the rear wall.
Had another shop do the rear custom shelves.
That guy installed them on Thursday this week.
The Runco VX-11d was shipped with the "Wrong" lens.
So it would not show on the 123" 16x9 screen with full coverage.
That was shipped today and will be here on Monday.
The Integra DHC-80.3 Pre-Amp processor & Integra DBS-50.3 Blu-Ray player are installed in the pull-out-rack.
All components were relocated in the rack to provide maximum air-space between them.
The 3-sets of dual-fans were reprogrammed to turn on with the system.
So "Heat" should be of No Concern this time around.
All components are hooked up with 1.4 HDMI this time.
The Spaghetti wiring that use to be is No-Longer.
They also did some looking and decided not to use the WIFI remote from my computer to the gear.
They are running a cable straight to my computer so it will be "Hard Wired".
That is going to work out nicely.
Oh the 4-Mirage BPS-400 subs are going to new locations.
The 2 for the front are now moved to where they will stay.
The rear ones are going to be Stacked.
Between them will be the Auralex GREAT GRAMMA.
Also under all the subs will be the Auralex GREAT GRAMMA.
They have finished for today and will return on Monday with the {Correct Runco Lens} and also the 4-Auralex GREAT GRAMMAS.
We are also going to use these under the rear JML Mini Utopia spkrs.
They will place them at an 8-Deg. Tilt (Auralex MOPAD Monitor Isolation Pads).
I took a few pictures I can post here.
The techs just showed up.
Left, (John) & (Jayson) on Right.
Here comes the Runco VX-11d.
The 10-Year Old Gear.
Check out all the Mass of Cables that were used 10-Yrs. ago.
New Integra and Runco DHD Controller.
Much fewer cables as all this is now running HDMI 1.4.
Full frontal with everything in place.
Notice the 2-Mirage Subs are now on the same line.
The front really worked out very well.
Left side view of front & you can see the Richard Gray Devices.
Right side view of front & you can see the Richard Gray Devices.
This continues on Post below,