Who's got the best price on a TR6060?

[1996lasercobra]

I have watched and waited only to just miss one by minuts a few times. Who's got the best price? I am open to rebuil, new, and swap parts also, such as shifter, crossmember, etc. Looking like D&D Transmission has the bes price so far. Any one out there that know of a better price please let me know. Thanks to all who take the time to read this.

 

[bigray327]

I'll have a used one for sale for $1500 for local Houston pickup, soon. Cheap because it's clunking a little.

 

[JeremyH]

I got almost everything i need for the swap off ebay.

 

[1996lasercobra]

I'll have a used one for sale for $1500 for local Houston pickup, soon. Cheap because it's clunking a little.

Thanks for the offer, but clunking makes me a little nervouse since it's my daily driver. I appreciate your honesty though, it says alot about you.

I got almost everything i need for the swap off ebay.

Thanks I'll check it out. I've heard all kinds of stuff, but can anyone who's done a swap from a TR3650 to a TR6060 tell me what I need.

 

[JeremyH]

I just searched and asked guys questions about it, there are quite a few threads with lots of info on the swap.

 

[BruceH]

$1600 for a 6060 from LaPoint auto recyclers.

$2700 for a full tilt rebuild from Liberty last time I checked.

 

[1996lasercobra]

$1600 for a 6060 from LaPoint auto recyclers.

$2700 for a full tilt rebuild from Liberty last time I checked.

Thank you sir. Will check these stat.

 

[SherrodMustang]

Ebay is your friend on this one, most of everything can be had on the site for cheap prices.

 

[2006torquefreak]

Thanks I'll check it out. I've heard all kinds of stuff, but can anyone who's done a swap from a TR3650 to a TR6060 tell me what I need.

I was going to do this swap on my 06 before I went 5.0, you need trans of course, stock gt500 or kr short throw shifter with linkage and bolts, crossmember for a 6060, driveshaft, and 26 spline clutch and flywheel.

 

[Dread53]

I just bought mine and was arranging shipping, and prices are all over the map. From Ohio to Wyoming varied from $508 (FedEx Freight) to $340 (Roadway) to $227 (R&L). R&L got the call.

 

[JeremyH]

I got mine shipped for $100.

 

[tigerhonaker]

 

[SherrodMustang]

Got my off Ebay for $1400 and picked it up in Atlanta about 2 hours away.

 

[gil_t2]

If i had an 2011 5.0 i would still swap to the TR6060

 

[1996lasercobra]

$1600 for a 6060 from LaPoint auto recyclers.

$2700 for a full tilt rebuild from Liberty last time I checked.

Got one from LaPoint. 2009 Remanufactured $1,600. Not too bad. Thanks BruceH.

 

[BruceH]

Got one from LaPoint. 2009 Remanufactured $1,600. Not too bad. Thanks BruceH.

It should come with a new slave too.

 

[JeremyH]

It should come with a new slave too.

Really? I didnt see one in the pics of the one I bought, i already ordered a new oem slave.

 

[BruceH]

Really? I didnt see one in the pics of the one I bought, i already ordered a new oem slave.

Mine came with a slave that had slight wear marks on it. I was told it was used after rebuild on a testing device. However I purchased my tranny from a third party who told me alot of things that didn't pan out. Anyhow here is what came with mine. I put a new one in anyway and sold this one on ebay as used. Got $80 for it too.

 

[JeremyH]

Gotcha, yeah the slave in the car only has about 10,000 miles on it, but I like to put in a new slave, it cant hurt.