muztangman93
forum member
Since its electrical that's one thing I would rather not chance. I have never soldered before.
Here you go its a little cleaner now than this picture but you can see it a little better.
Nice! very clean wire tuck.... mine won't be as nice as that till i move the fuse box and pcm , but a lot won't be seen since the all the braided lines and Charge cool Vortech . I'll be posting a picture of the finished project later this week. then in a moth or two i'll relocate the fuse box and pcm, going to get the car back together for now to enjoy for the rest of summer, then finish.
Since its electrical that's one thing I would rather not chance. I have never soldered before.
Looking forward to seeing how yours turns out James. I'm leaning towards a partial tuck too.
Thanks Jaye, I would have already had it finished , but I started stripping the valve covers and polished the charge cooler on the Vortech,it a had a few scratches on it, that I wanted to fix while it was off.Plus once I seen how bad the valve covers where while off the engine ,even after cleaning,I knew I had to do something with them.
Just leave them polished for now, they where powder coated and they just wouldn't come clean , so I'll leave it polished for now and see what happens. Also stripped the alt bracket and polished it while it was off,going to try and clean throttle body up while it's off also, just can't afford to replace it with a polished FRPP one at this time.You going to pc them or leave them polished? I can't imagine how difficult it would be to keep that chrome shined up.
Just leave them polished for now, they where powder coated and they just wouldn't come clean , so I'll leave it polished for now and see what happens. Also stripped the alt bracket and polished it while it was off,going to try and clean throttle body up while it's off also, just can't afford to replace it with a polished FRPP one at this time.
Yeah that TB costs a pretty penny, but so shiny.
Probably 12 to 15 inches I would imagine. Ive been using the mafia just as an extension and its an awful expensive extension. Its on my list to get done just haven't gotten around to it. I have hydrodipped valve covers and would absolutely love for people to be able to see them got way to may wires cluttering everything up.
Sorry Josh I was mainly asking RJ about the PCM move and the CKP question is because they come shielded. That is ok with the MAFia extension too.
All of the ones extended 3 ish feet were the headlight harness. The injector and coil pack wires were only extended maybe 12 inches and were all done with 18 gauge