Complete 3v exhaust headers, x pipe and catback

[KenB]

This is the complete exhaust off my 2005 Mustang GT Auto. It consists of Stainless Works 1 3/4" primary long tube headers, 3" X pipe and 3 inch custom catback in stainless. It's setup for either Mac 3" Mufflers or these stock ones that are modified. The system has a set of Magnaflow magnapacks after the X to smooth out the sound. This is a great sounding exhaust with either muffler setup, I'm including both. Everything is in great shape but keep in mind that parts of this setup are 5+ years old so there are stains etc. But it's all high quality stainless and in great shape.

Only thing I would recommend is all new connections/clamps. Also, as you can see the x through the back mufflers is all one piece as this was built on my car and I was able to get it off on the lift. I didn't cut it in case I sold it local. But most likely it will need to be cut and unions added there.

To duplicate this setup you would need Stainless Works Headers, X Pipe, 3" Catback piping, 2 Magnaflow Magnapacks, 2 3" Mac Mufflers and 2 Modified stock mufflers.

I'll take $1,100 plus shipping for everything.

 

[jboss347]

where r u located???

 

[KenB]

where r u located???

South Florida. I'm willing to ship but on this you pay actual shipping. I would obviously have to cut the catback for shipping. But it should really have been cut anyway for ease of install.

 

[J.Cagle]

Got any sound clips of it installed?

 

[KenB]

Got any sound clips of it installed?

I do with the Mac mufflers. Give me a few minutes to round up some videos.

 

[KenB]

Here's one

http://www.youtube.com/watch?v=oky3U0yiNa8

actually, here it is with the stock mufflers. kinda hard to hear over the blower

http://www.youtube.com/watch?v=OX_sbjgUIYo&list=UUjk9LDqTHqh8lCQ6gu3nafw&feature=plcp

Can kinda hear it here:

http://www.youtube.com/watch?v=CPDPoVw2sgw&list=UUjwSr3VqiVQFxHuh1VLzHeA&index=40

I personally loved it, just going turbo. The Mac setup is loud but has good tone. Some of those clips had different resonators in there but it sounds the same.

 

[Murdamarshall]

Would you part out? Im interested in the x pipe and im local

 

[KenB]

Would you part out? Im interested in the x pipe and im local

Probably not. I've had too many questions on the whole setup and rather sell it that way. Thanks.

 

[KenB]

$1,000 really need this to move

 

[ayabrego]

let me know if you will sell xpipe and long tubes

 

[KenB]

let me know if you will sell xpipe and long tubes

You can make an offer on those. How much of the X do you want? Including the renonators? Not sure there would be enough left of the x if I cut it before the resonators. PM me an offer and exactly how much of the x you want.

 

[KenB]

$800 for it all

 

[KenB]

$750 bottom dollar

 

[UltraKla$$ic]

$750 bottom dollar

Someone could have a FULL exhaust for $750 bucks!!!!!!!!

SMOKIN DEAL!! I paid that JUST for my headers.

Somebody even remotely thinking of an exhaust setup needs to jump on this!!!

 

[HellsBells]

Someone could have a FULL exhaust for $750 bucks!!!!!!!!

SMOKIN DEAL!! I paid that JUST for my headers.

Somebody even remotely thinking of an exhaust setup needs to jump on this!!!

I got suckered by some fool on this forum into buying hot rod cams so now I don't have money for this.

 

[UltraKla$$ic]

I got suckered by some fool on this forum into buying hot rod cams so now I don't have money for this.

Uh.....you don't NEED both kidneys. LOL!!

 

[HellsBells]

Uh.....you don't NEED both kidneys. LOL!!

Already gave one to my car insurance company.

 

[KenB]

Someone could have a FULL exhaust for $750 bucks!!!!!!!!

SMOKIN DEAL!! I paid that JUST for my headers.

Somebody even remotely thinking of an exhaust setup needs to jump on this!!!

That's what I'm thinking! I can't believe I have it listed for that. I may change my mind. LOL

 

[HellsBells]

That's what I'm thinking! I can't believe I have it listed for that. I may change my mind. LOL

What are the gains on that header and how was the install?

 

[KenB]

What are the gains on that header and how was the install?

I did the headers with a bunch of other things, but you will normally see 15-20 rwhp out of a setup like this. It completely changes the sounds of the car also because of the large primaries. Sounds deeper and meaner.

The install is pretty easy, just support the engine, remove the motor mount and it slips right in from the bottom.