07 Boss's latest activity
-
07 Boss replied to the thread Boost Leak around MAF..Have you tried a new maf sensor? It's plastic, maybe there is a crack in it or it's leaking internally somewhere. If you tried rtv... -
07 Boss replied to the thread Timing chain kit deal?.I tend to buy from CJ Pony Parts because I just go pick it up at their warehouse which is in my town. I got my last timing kit from them.
-
07 Boss replied to the thread PMAS 120mm vs. Steeda 101mm on 2012 GT with 2018 intake..And bigger is not necessarily better. A larger diameter intake may flow more air but one has to consider the reduced velocity as having...
-
07 Boss replied to the thread Need help finding photos.I had Gil at Shelby do the tuning for my whipple set up. I will look and see If I can find the pics that I took. I don't think I got...
-
07 Boss replied to the thread Whipple 3v supercharger.I would say that 450 rwhp is a safe limit for stock rods though I ran closer to 500 for many years with my whipple. I have since backed...
-
07 Boss replied to the thread Windsor swap.Wait when you say windsor block, what exactly do you mean? I was assuming a 4.6 Iron block.
-
07 Boss replied to the thread Whipple 3v supercharger.You know if you can't afford to go with an SC, why not go with some nitrous? My current build is going to be NA with a 200 or 250 shot...
-
07 Boss replied to the thread Traction control constant on.Have you tried to drive around with the TC off?
-
07 Boss replied to the thread Windsor swap.Are you going to bolt 3 valve heads on there? If so I would think any regular headers would fit.
-
07 Boss replied to the thread Whipple 3v supercharger.Why do you want a used one? There is no support for it. I don't think Whipple will even rebuild the 3 valve blowers.
-
07 Boss replied to the thread PCV Valve Part Number??? 2008 GT.Not completely. Yes, gasoline will eventually evaporate out of motor oil, but it is a slow process that will not fully restore the...
-
07 Boss replied to the thread PCV Valve Part Number??? 2008 GT.So let me try and clear this up as there seems to be some confusion. If you are going to keep your PCV system as a closed system, no...
-
07 Boss replied to the thread HELP. Flagged by BAR Nazi's..Can't you just get a CARB approved intake? Or am I being too simple?
-
07 Boss replied to the thread Catch can for paxton sc?.You have to remove the valve cover. it is tucked behind a little baffle. I cut that and then peeled it back exposing the tube with the...
-
07 Boss replied to the thread Water Pump and engine parts advice.I don't think there is an option for a long or short water pump, but I wouldn't know as I run an electric pump and the pulley is just a...
Latest posts
-
-
-
Should I stay away from 2005 to 2008 (spark plugs)?
- Latest: 2019Chieftain-no-more
-
Support us!
Support Us - Become A Supporting Member Today!
Click Here For Details