Demetre94's latest activity
-
DDemetre94 replied to the thread Limp mode problems.I guess my question is, how do I properly diagnose the wire if it’s only throwing limp mode sometimes and not right after start.
-
DDemetre94 replied to the thread Limp mode problems.So the reading my scanner gives me for the MAF is g/s (grams per second). I truly don’t even know what that means.
-
DJust to make sure we haven't got crossed wires here(Parden the pun) when you fitted the new MAF after the shorting incident the new MAF...
-
DMake sure you are monitoring the correct MAF parameter. You want 'MAF volts' change with rpm/throttle input, just to see if MAF working.
-
DDemetre94 replied to the thread Limp mode problems.lol nice. But i never tested the old MAF sensor, i seen the code and figured id just replace it. Then thats when I started jumping into...
-
DDemetre94 replied to the thread Limp mode problems.Thank you! I’m going to check that today
-
DCheck the ground to the MAF. It is on passenger side next to top radiator support. Here is a photo of mine. Disregard wires on left...
-
DDemetre94 replied to the thread Limp mode problems.Thanks for the advice! Yes I did replace the MAF after the spark. The spark was very short, but it was a pretty big spark. When I hooked...
-
DId say check your own harness first before changing it out as I think its a big job. Stick to the smaller straight forward stuff first...
-
DDemetre94 replied to the thread Limp mode problems.Could a bad alternator be giving me MAF codes? I replaced the MAF and even got a junkyard ecu, and it changed nothing. If it is a burnt...
-
DGet a DVM...and put it across the battery terminals. Should be aprx 12.4 vdc with eng off. With eng on....and idling, should be...
-
DYou need to check as much of your wiring loom as possible for melted wires. That sounds like burnt/melted connection symptoms where it...
-
DDemetre94 replied to the thread Limp mode problems.Thank you, I changed the wire running from alternator to battery, a new battery and new connectors for the terminals. That seems to have...
-
DI would not say all the connections would go bad at once. They do fail over time. The connection that was carrying the most current when...
-
DDemetre94 replied to the thread Limp mode problems.Do you think the spark I had from grounding the battery could’ve caused all of the wires/ground points to go bad? I wasn’t having any...
Support us!
Support Us - Become A Supporting Member Today!
Click Here For Details