Recent content by jmustang

  1. jmustang

    New parts still a "Clunk" over bumps..

    Also check front sway bay bushings, that fixed the clunk for me. Sent from my iPhone using Tapatalk
  2. jmustang

    Resonators to quiet down Borla ATAK

    Did you stagger the resonators? Sent from my iPhone using Tapatalk
  3. jmustang

    Resonators to quiet down Borla ATAK

    Here’s a picture of the ATAKs, they’re a straight through muffler. You can see daylight looking through them Sent from my iPhone using Tapatalk
  4. jmustang

    Resonators to quiet down Borla ATAK

    Love the sound of the ATAKs, but lately have been finding them a little too loud. They also drone pretty bad below 2k rpm. Exhaust is stock up to mufflers. 2 options I’m thinking of: 1) Install resonators, vibrant performance looks good. Not sure wether to go with ultra quiets or bottle style...
  5. jmustang

    Which new Alt & pulley

    I would advise against PA Performance. After my stock unit failed I replaced it with one of their high output alternators. It went bad after less than a year. Sent from my iPhone using Tapatalk
  6. jmustang

    Roll Bar for 2008 Mustang Convertible

    Take a look at the maximum motorsports roll bar. Pretty straight forward install and the backseat is actually useable if you don’t opt for the cross brace. Good look getting the interior plastics to fit again after though. Be careful with cheap roll bars and their mounting points. I’ve seen...
  7. jmustang

    Help me choose a suspension setup

    So coil overs are no good because it’s overkill? Or because it ruins the ride? They’re not much more expensive than going the shock and strut route. Appreciate the input. Are you using CC plates? Sent from my iPhone using Tapatalk
  8. jmustang

    Help me choose a suspension setup

    Just completed my third track day on my stock suspension and alignment. Rolled onto the outside of the front tires hard, came within a few inches of the rim. So I need camber plates but figured I may as well go all out and replace the tired old soft shocks. I like to do tons of research before...
  9. jmustang

    Racing Type Seat Upgrade

    IMO,Braum makes the best looking seats. How are they on track? Sent from my iPhone using Tapatalk
  10. jmustang

    Boss 302 Springs Worth it?

    Great stuff, thank you Norm Sent from my iPhone using Tapatalk
  11. jmustang

    Boss 302 Springs Worth it?

    What shock/strut would you recommend pairing with those springs? I’m eyeing them myself as my car is supercharged and Ive run a few hpde this year. Sent from my iPhone using Tapatalk
  12. jmustang

    Front end too low after Whipple install - how to raise it?

    Following this thread, I have the same issues. Stock suspension struggles under the added weight in the front for sure. Thinking about going with the Koni yellow adjustable shocks but not sure on the spring. Not really looking to lower the car if possible. Sent from my iPhone using Tapatalk
  13. jmustang

    Convertible rear end links loose

    18mm rear sway bar endlinks we’re so loose I could move them laterally by hand while the car was parked. I replaced the worn rubber bushings with prothane bushings thinking that would solve the problem but I can still move them by hand! When driving hpde I can hear clunking from the rear end...
  14. jmustang

    Steering wheel vibration after visiting Ford Dealership

    The retailer is opening the claim with Michelin and I am providing them the documentation. They are an internet company, no physical locations. As long as the documentation is acceptable they say they will send a replacement, and returning the defective tires may or may not be necessary...
  15. jmustang

    Steering wheel vibration after visiting Ford Dealership

    Appreciate your help skwerl, thank you. For anyone else interested, I purchased the Michelin’s through Simple Tire. I am starting the return/warranty process and they have requested the following: 1) Install-on invoice copy 2) Balancing reports showing the issue (especially, if its a print...
See more

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Back
Top