Recent content by Proc

FOUND IT! Fuse 68 in the fuse from the box under the hood had failed in such a way that a visual inspection wasn’t enough. I used a volt meter on every fuse and that one wasn’t working. I swapped it and everything worked.

Admittedly that was the first place I looked. These cars are known for their water leakage, so I addressed that shortly after getting the car. Still, I checked and all is good and dry. Btw, I hate that junction box with a passion. Terrible design.

Put the key in this v6 2009 automatic and got nothing: no door chime when the door was open, neither the dash nor radio power up when in accessory mode, and the car doesn’t start. It’s like the car isn’t even seeing the key in the tumbler although the tumbler turns. The car has power: 12v at the...

Btw, closing this out, it was the temperature blend door actuator. I was being a dummy and forgot that one is different than all the rest. And I was being stubborn thinking “it can’t be that! I replaced it once already!” Swapped out the old one (it lasted a whole 16 months) and all was good...

Well, I flushed out the heater core. It was clean and blasting air flowed both ways with no obstructions and no gunk. No change in the interior temp. The metal piping leading to and from the heater core hoses get hot to the touch (one is cooler than the other). Engine gets up to operating...

Isn’t there something that controls the airflow to go to the heater core vs the AC evaporator coil?

Hoping someone can point me in the right direction. I have a v6 (one of 4 mustangs in the family) with no heat coming out any vents. This one has me stumped. The temperature on the engine is good according to the gauge, coolant level is fine, hoses in and out of the firewall to the heater core...

Awesome, thank you. I admit I tried searching here and gave up early in my quest. The link you gave was perfect! Short story is: yes. The wiring would have to be worked out (expected), but otherwise they are direct fit replacements.

Anyone know if the 2010+ sill plate is the same as the 2007 sill plate? I know the 2010+ is illuminated, but I am wondering if the 2010+ will direct fit in a 2007..