Samos3's latest activity
-
I seriously doubt that a high mileage 4.6 3V will generate anywhere near 100psi oil pressure with a GT500 pump. Factory spec minimum... -
Samos3 replied to the thread GT500 3V Oil Pump Questions....I looked thru the Rockauto listings. In 08, the 4.6 in the Mustang used the same phaser as the F150 (both 4.6 and 5.4). All of the '13...
-
Samos3 replied to the thread GT500 3V Oil Pump Questions....All good points. And, yes, I did fall into the internet engineering trap I strive to avoid. On any forum (I do not include...
-
Samos3 replied to the thread GT500 3V Oil Pump Questions....Back to one of my original questions about that pin... Even the pics on TascaParts shows that pin. So it is a factory item, not part of...
-
Samos3 replied to the thread GT500 3V Oil Pump Questions....If I do, them I'm running a supposed 90-100 psi. And higher volume. I think I'm going to stick with the stock 80psi 3v spring and check...
-
Samos3 replied to the thread GT500 3V Oil Pump Questions....FSM for 2008 F150 says 40-75psi for 5.4 3V and 4.6 2V. Rockauto shows Melling 340HV for the 5.4 3V and yet a different Melling pump for...
-
Samos3 replied to the thread GT500 3V Oil Pump Questions....That's what the FSM specs say for the 5.4 4v. Spring could be different. There are different pumps from Melling for the 5.4 4V and the...
-
Fantastic right up and excellent tips.
-
Samos3 replied to the thread Cams and timing.All 24 rockers are in! It was tedious and fussy just as Whitman Ink (and others...) warned me. But I did it! The finger on top of the...
-
-
Samos3 replied to the thread GT500 3V Oil Pump Questions....Also, one reason for the higher volume is the piston oil squirters. At higher rpm, they will consume some of that volume and pressure.
-
Samos3 replied to the thread GT500 3V Oil Pump Questions....This thread talks about the new pump possibly having a 90-100psi spring. Regular 3V vs 13-14 GT500 oil pump | Mustang Bullitt Forum...
-
Samos3 replied to the thread GT500 3V Oil Pump Questions....Okay, I think I know what is happening. I looked my 2008 FSM. It also shows 75psi at 2k. For the 4.6 3v. If you look at the 2008 5.4 4v...
-
Samos3 replied to the thread GT500 3V Oil Pump Questions....So maybe this 60psi info is inaccurate? The spring I put in is a stock Mustang 4.6 3v spring.
-
Just trying to be of some help here since you ended this statement w\ a ?..............from this spec sheet copy from the FWM for a 4.6L...
-
Samos3 replied to the thread Cams and timing.Chains on. Timing marks all lined up. A word of note.. the crank holding tool that fits over the crank snout and keyway and engages on...
-
Support us!
Support Us - Become A Supporting Member Today!
Click Here For Details