Recent content by Sonny08GT

  1. Sonny08GT

    2008 Mustang GT Transmission Swap Wiring Problem

    Glad you got it sorted out and thanks for sharing your solution !
  2. Sonny08GT

    6R80 in my 05

    I love mine works great on my 08 Stang
  3. Sonny08GT

    6R80 in my 05

    Hi all if your car was originally a manual you can wire the park neutral switch to the clutch pedal fully depressed switch and it will work also the is a second switch on the clutch that is for the clutch pedal fully released it is actually a cruise control interrupt switch if you jump that...
  4. Sonny08GT

    6R80 in my 05

    Sorry haven't been on for awhile. I only needed to make a hole for the cable and I made the mistake of not doing that before the trans was in. The cable goes out the front of the shifter and barely clears the plastic dash below the heater controls. The difficulty is the metal brackets that...
  5. Sonny08GT

    6R80 in my 05

    If your putting the 6R80 in a S197 you just need a 2010-2012 crossmember from a car that had a 6R80 in it bolts right in
  6. Sonny08GT

    6R80 in my 05

    TCI Outlaw
  7. Sonny08GT

    6R80 in my 05

  8. Sonny08GT

    6R80 in my 05

    Sorry haven’t been on here for a while did you get your speedometer sorted out
  9. Sonny08GT

    6R80 in my 05

    The flex plate you need for the 4.6 6 bolt crank is PMA-PAX28110 from Summit. Just double check me b4 you order but it’s in my car
  10. Sonny08GT

    6R80 in my 05

    The TCI Outlaw is also an option for a shifter. It has the 2 buttons for manual shifting, the software will switch to manual mode when the shifter is pulled back 1 click from drive. Just FYI
  11. Sonny08GT

    6R80 in my 05

    I used the Performance Automatic cooler kit from Summit #PA68506 it’s on sale now for $355 so far working great on my 08 Mustang
  12. Sonny08GT

    6R80 in my 05

    Got the shift light and display installed finally still need to make a bezel for the display hopefully can get it done soon
  13. Sonny08GT

    6R80 in my 05

    Remote display I went ahead and wired up a remote display went to an electronics shop and got a bunch of jumper wires put them together an walah. It was a bit tedious but I got it done doing the same thing with a shfift light plan to mount both between the center AC vents
  14. Sonny08GT

    6R80 in my 05

    Wow wish I would have posted that sooner maybe it could have been in time to help you out. The 2 buttons on mine work great for shifting I don't have linelock or transbrake ... yet. The hardest part of the shifter install was the hole for the cable I had the transmission in the car so I went at...
  15. Sonny08GT

    6R80 in my 05

    I guess you me the shifter gate plate as photo included. The shifters come with 2 gates 1 for 3 speed and 1 for 4 speed autos and are really designed for older type auto trans 350-400 turbos, C4-C6 etc. The trick is the length of the shift arm on the transmission see picture. The measurement on...
See more

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Back
Top