Recent content by Steven210

Mine turned out to be both Cats

That’s crazy but I can believe it. I guess it’s worth a shot to try.

So possibly since the two are different, the computer is not liking it?

Yes I originally only replaced one side, the bank 2. P430 code was the only one popping up at the time so try replacing it with an OEM?

So even though bank 1 is still the original CaT, the new aftermarket cat on bank 2 will trip a code for both?

So after a week of not coming on, the engine light came on. Scanned it and p0420 & 430 came back. I attached a picture of what the scan tool said. What does that mean? Is this something I’ll probably have to take into the dealership to diagnose?

Yea I replaced it.

Ok so here’s an update. Last Friday I replaced the pcv and tightened the loose bolts on the valve covers and checking the hoses from the Intake tube, drove the car all week with no codes popping. Saturday afternoon the light comes on and it’s P014A. this car is driving me crazy.

the only problem is they cost so dang much lol. Might be easier to turn off lol

I can do that but I was thinking, would clog filters cause a misfire code? the only thing about checking the datalogs is I’m not sure what to look for.

asked everyone and no one I know has a leaf blower lol. Still double checked the exhaust connections. I did go and check the hoses and connections going into the air intake and manifold. Noticed the valve cover bolts we loose, so I torqued them back down. I also Cleaned the MAF sensor again. I...

That’s a good thing. I don’t have to

Thanks for that technique. I’ll have to give it a shot. This code is driving me crazy, making me wish I ran straight pipes lol

I can’t say 100% but I’ve double checked the exhaust clamps. The only thing I didn’t change out was the gasket between the cat and exhaust manifold.

Thank you for your feedback. I was wondering if the aftermarket cat would still trigger it. And not sure why only one side