Is it possible for me to bring you the parts I want done , and then pick them up from you when finished ? I come to Charlotte a few times a month and it would save me shipping .
There is one more thing you might want to check , and that is to make sure the fans are running at the rad. when the a/c is on . If they should not come on while the a/c is on , it will build up too much pressure and bleed off some of the freon . Then when you use it again the next time and the...
YOu might want to check out the smart junction box . They can cause a lot of problems . http://www.allfordmustangs.com/forums/2005-2010-mustang-gt-tech/217714-smart-junction-box-blues.html
Where is the exhaust leak at , before the sensor or after ? If you have a leak in front of the sensor it will throw a code on you , even a small leak .
I don't know how the TPMS would affect the advance trac system ,as the advance trac gets it's info from the ABS from the axles . I have had aftermarket wheels and tires on mine for over a year ,and had no problems with anything other than the light coming on to tell me I have "low air pressure"...
I am sure some of you have seen this, but thought I would show the link to those that haven't seen this, "Through custom tuning, twin turbo's and much more they were able to generat over 1047 hp.on a stock motor."
http://www.youtube.com/watch?v=aNtPpqeRNrA
aNtPpqeRNrA
So now the...
You can also get one from RockAuto Parts for a lot less . A-1 CARDONE Part # 782147F Reman. A-1 CARDONE Engine Control Computer - Return and Rebuild Service Only - By ordering this service you are agreeing to send your original part to the manufacturer to be rebuilt. Rebuild time is...
Just a thought here, but why not turn the H/E over putting the lines on the drivers side, and move the pump to that side also like the TVS style does ? Then all you have to do is add some length to the wires that power the pump ,
You don't have to take the carrier out . Pull the axles out , the S-spring . There are different shims for the clutch pack to help tighten it up .
Installation Note:
With the differential side gear laying face down with the splined part facing you, stack the clutch pack as follows. Steel...