I read my boost from the intake and i also put a gauge on the compressor cover to check both. And Im running the on3performance hot side piping. I changed the cold side to 3 inch. the intercooler size is 31x11.75x4inch thick. I also run a exhause cut out before the mufflers
And its a t4 turbo with a .96 a/r. and i tryed the unhooking the vacuum line to it and it still wouldnt boost over 14 llbs so it must not be the wastegate then. But I know turbopete on this forum runs a 78 precision turbo and some others as well. So i just wanted to know if anyone had heard of...
Ok well i dont want to put any companys name out there yet as im not sure its the turbo. But i called and turbo company and told them that i have a 3v mustang with forged internals at 9 to 1 compression with port and polished heads with stock valves and told them i wanted between 900 to 1000...
Yes journal bearing. .81 a/r and i know the compressor is 4 inch and 2.5 i think the hot side outlet is 3 inch but im not positive ill have to check in the morning