Recent content by ZwookY

  1. Z

    AC Fan Intermittent Issues

    Thanks, I'll try the blower resistor. Local store only has Echlin, that a decent brand?
  2. Z

    AC Fan Intermittent Issues

    I'm seeing some weird behavior with the AC fan in my 05 GT. A couple times over the last month when I had the AC set to MAX A/C, the fan wasn't blowing at all, no matter what fan speed I selected. It started working again after I shut the car off and back on. Another time it took a couple...
  3. Z

    05 GT Oil Pressure Sensor

    Well, went back to Napa and got another sensor, Echlin and everything seems good. No warnings yet. Would love Motorcraft but too impatient to wait.
  4. Z

    05 GT Oil Pressure Sensor

    I used MAF cleaner and it really cleaned it up good. Now when I turn the car on, I get the warning full time! Am I supposed to be turning the new sensor in until it bottoms out?
  5. Z

    05 GT Oil Pressure Sensor

    05 Mustang GT - 130K miles Recently I have been getting a low oil pressure warning right when I put the car in gear, maybe 5 or so times the last month. It goes away almost instantly and the car runs fine. I changed the oil but it happened again after. Went to change the oil pressure sensor...
  6. Z

    P0171, P0174, & P0340

    2nd new alternator passed both tests and everything seems fine, no codes in the little bit I've driven it so far. I had to drive a few times yesterday before fixing and the codes appeared just minutes into each drive. I "think" I'm good now. :)
  7. Z

    P0171, P0174, & P0340

    You’re right on. My brand new alternator that was replaced on Memorial Day failed the diode portion of the test. Got a replacement but unfortunately it’s pouring rain.
  8. Z

    P0171, P0174, & P0340

    05 GT and I recently received these codes, P0171, P0174, P0340 Anyone know a specific reason that would trigger theses 3 codes together? MAF maybe? IS the cam sensor totally unrelated? Car runs but gets a little sluggish here and there for a couple seconds. When I clear the codes, car runs...
  9. Z

    05 GT Alternator Cable?

    I finally got the wire replaced. When I was searching for the original replacement, many sites showed they were no longer being made so I opted for the upgraded cable from PA Performance. Then new one is much beefier and I'm very happy with it. This photo is the old and new cables side by side.
  10. Z

    05 GT Alternator Cable?

    The new cable was delivered today, but they sent me the wrong one. It's the shorty version and only 30 inches long. They are expediting me the correct one. This cable is great quality though, very beefy and a huge upgrade.
  11. Z

    05 GT Alternator Cable?

    It's a way overpriced alternator from O'Reilly, but nothing upgraded. I was 2 hours from home when it crapped out. Changed it in the parking lot in 90+ heat. Was driving about 10 miles after the switch and the car shut off for like 3 seconds then came back on and there was an awful smell. The...
  12. Z

    05 GT Alternator Cable?

    "This is the OEM battery harness for your car. Plug & Play. Highly recommend going with Motorcraft OEM... WC-95954 Pardon Our Interruption... Pardon Our Interruption..." The OEM harness was changed, this is separate from that cable. I've got the PA Performance cable on the way. Here's a photo...
  13. Z

    05 GT Alternator Cable?

    Looks like I'm going to go with this one: https://www.paperformance.com/premium-mid-mount-9909/?searchid=46873&search_query=+Premium+Mid+Mount+%289909%29 Anyone use this before? 48" seems like a tight fit.
  14. Z

    05 GT Alternator Cable?

    I'd like a direct factory replacement, but at this point I'd settle for something that works. Right now I cut the wire and crimped it together with a connector just to get it running.
  15. Z

    05 GT Alternator Cable?

    Anyone know where I can get the cable that goes from the alternator to the positive terminal of the battery for an 05 GT? I had to replace the alternator and it fried the original cable. I had replaced the entire positive cable assembly about a year and a half ago but it didn't include the...

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Back
Top