Search results for query: *

  1. eighty6gt

    Unfinished mating surfaces on new short block...(?)

    Huh it looks like I was right. That blasting that ruined the sealing surfaces is complete bullshit.
  2. eighty6gt

    Don’t sell your S197!!!

    What do y'all figure I could get for my 4.6 3v engine (boss 302 rods) with 123700 cams, a TVS 1.9 supercharger, headers, what not? about 100k miles on the whole thing, but it was all apart 13k ago for the rods/cams/had the exh seats and valves touched up. No oil leaks. Super damper!
  3. eighty6gt

    putting in 5.4 2v in 2010 mustang.

    nothing beats a carbed small block - I'm building a few before IC engine parts are banned here in 2035!
  4. eighty6gt

    putting in 5.4 2v in 2010 mustang.

    why not a 289 or 302 with a mechanical fuel pump, carb, vic jr and ported tfs heads Shift it at 7000
  5. eighty6gt

    Unfinished mating surfaces on new short block...(?)

    Is it a longer key with the center milled out so it's cantilevered to hold the tone wheel? I'd take the crank out and have that repaired properly. Did you try removing the paint from the pan rail/etc? How is there not a bunch of paint in the oil ports/crankcase area..
  6. eighty6gt

    What engine oil and viscosity are you using?

    I actually don't know - maybe the costco 5w30 synth with some 5w50 ford mixed in????
  7. eighty6gt

    GT500 upper strut mount camber Q.

    I set toe close to zero with a carpenters tape measure. 15 years and nary an issue
  8. eighty6gt

    STEEDA HEAVY DUTY CAMBER /CASTER PLATES TROUBLES

    It's a cheap car with a cheap front suspension. Generally always going to be spending money - key is to stay close to stock, stay away from steeda stuff and offshore coil overs. I'm not even convinced the stock mounts have any camber built into them - they're probably symmetrical.
  9. eighty6gt

    Pedals too close together

    Just swap in an automatic
  10. eighty6gt

    Having some Codes and Issues with my Mustang

    The market for used cars is pretty nuts, can probably get good value for the thing even with some issues. That's what I'd do. Then get a decent ebike. The advice given seems to talk about manifold to head, I think you could have manifold to downpipe leaks. Any Ford dealership should be able...
  11. eighty6gt

    DiMora's Build Thread

    Whatever you do, just run stock style rings. Everyone I know who uses the ss rings goes through oil like a container ship
  12. eighty6gt

    Rpm limiter

    I hit the rev limiter because my car was supercharged; had to rebuild the engine
  13. eighty6gt

    2009 4.6 rough idle and white smoke

    What oil pump?
  14. eighty6gt

    New member need help

    Why does it increase?
  15. eighty6gt

    5r55s Suggestion

    Probably traded the car for a 5.0/6speed auto with a circle d and is loving life
  16. eighty6gt

    Suspension seems to have no travel when hitting potholes or bumps

    I talked to vorschlag about this, guy said to buy a BMW. These cars ride rough, they're cheap!
  17. eighty6gt

    New member need help

    Take the car to Ford. They'll be able to scan and repair it without just throwing parts at the problem (that are worse than the ones the car came with, aftermarket/replacement parts quality is shit.)
  18. eighty6gt

    New member need help

    what
  19. eighty6gt

    So,what the hell is this thing?

    Throw it in the trash heap!
  20. eighty6gt

    STEEDA HEAVY DUTY CAMBER /CASTER PLATES TROUBLES

    My steeda mounts are loud but so we're the originals. The originals broke, also. The steeda isn't machined correctly on one side and the bearing race is broken So overall pretty awesome. I am going to try to fix them or sell the car.
  21. eighty6gt

    411 on Disabling TPMS via Forscan

    I have a 2008. Worked perfectly, no issues for years. Not a peep out of the system!
  22. eighty6gt

    411 on Disabling TPMS via Forscan

    I have an obdlink MX and used forscan to disable the warning and lamp. I probably wrote down somewhere what I did, and should check what's in the modules. Anyway, look here: https://forscan.org/forum/viewtopic.php?f=6&t=3119&p=28609&hilit=2009+mustang+TPMS#p28609
  23. eighty6gt

    Oil pump failure

    I have boundary gears in a gt500 pump with the heavy steel back plate Whooooo eeeeee my car has been awesome for years with them!! **Slaps hood**
  24. eighty6gt

    Low oil pressure at stop

    I knew it; you can't kill a 3v
  25. eighty6gt

    Missfire below 4k that clears up the second you go wot and comes and goes

    Sounds like sunken exhaust valve(s,) a friend's 5.0 pickup went down to this issue.

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Back
Top