Search results for query: *

  • Users: shanec
  • Content: Threads
  • Order by date
  1. shanec

    CS69, SHR louvers, Cervini Type IV, chin, GT500 spoiler

    I've been wanting these wheels for a long time. Took forever to find them in 18". BTW, in the background you see a 100 year flood in Vicksburg, MS. The mighty MS River swole up!
  2. shanec

    bigger wheels/tires = new brakes?

    Since putting on 18x9.5 wheels with 255/45/18 up front and 285/40/18 in the back (GT500 sizes) - my front disks are showing hot spots....so says my tire shop guy. The discs to have dark swirls on them. He says they've been glowing at one time at least. This is not a track car, just a DD. I'm...
  3. shanec

    Should an E-Force tic like this?

    http://www.youtube.com/watch?v=sBOvHlDrEZw
  4. shanec

    what IAT should raise alarms?

    ...in a supercharge car. I'm referring to the after-intercooled IAT. I know that key-off, heat-soaked in a parking lot it hits low 130's. I'm not sure I've ever seen it hit 140. I want to setup my Aerorforce Interceptor to let me know when my IAT gets too high. Seems like a good idea, as...
  5. shanec

    a little PCM help

    Where can I find the pinout for the PCM connectors. I need to test some pins and when my documentation says pin "B27" or something, I need to know where that is.
  6. shanec

    18-inch deep dish wheels?

    What's out there. Don't see many choices. All the best looking wheels seem to only come in 20s. :mad2: Don't hate the 18!
  7. shanec

    buy a Vette, build your own engine

    Wish Ford would do this so I could go to Detroit (or wherever) and insist on an aluminator block in my Mustang. http://www.google.com/hostednews/ap/article/ALeqM5gYLSHqfFoVEyLWQ-RK20o4Ndr9CwD9GTPGEG0 GM to let 2011 Corvette buyers help build engines By DEE-ANN DURBIN (AP) – 1 hour ago...
  8. shanec

    one time use hardware?

    Here's one of the bolts that holds on the rear sway bar. All the lower rear sway bracket bolts look like this, as does the hardware holding on the rear shocks. Is this stuff "one time use"? Some folks are telling me it is and that a crash into a ditch is looming. :wtf1: I put in new springs...
  9. shanec

    koni srt install question

    Top of this koni shock looks a lot different from stock. Am I supposed to try re-using the fittings on top of the stock shock?
  10. shanec

    C&L Street intake

    C&L Street intake $130 shipped
  11. shanec

    Bassani Stainless Steel Street Mufflers

    Bassani Stainless Steel Street Mufflers. Check them out here, including a video (not my car) - http://www.ninosport.com/Bassani-Axle-back-2005-09-Mustang-GT-46075-p/46075.htm $350 shipped. These are $550 new.
  12. shanec

    FRPP K-springs

    I've got a set of FRPP K-Springs, part number m-5300-k. I bought these a few months ago and never installed them. I've changed my mind about how much drop I want (Cervini Type III chin spoiler, low-hanging exhaust, and heavy supercharger concerns). These are new, in the box, have never been...
  13. shanec

    how to upgrade frpp clutch line

    Got my frpp clutch line. What do I need to know to replace my stocker with this line? Isn't there just a clip holding the stocker on at the master cylinder end and at the transmission? Just pop these clips, insert new line, replace clips? How do I manage the fluid? Do I have to drain the...
  14. shanec

    WTB premium dash panels & vents

    This...
  15. shanec

    FRPP gear whine poll

    Do your FRPP gears whine?
  16. shanec

    Dynojet Wideband2 or Wideband Commander?

    I'm looking to get a wideband to connect to my aeroforce interceptor. Want to give Dynojet a shot. But they offer a "Wideband2" kit and a "Wideband Commander" kit. Both look real similar. Can't figure out which one I want. I think all I need is a 0-5V signal. Not looking to log RPM and other...
  17. shanec

    What's your A/F in normal driving/reving?

    This is a quick spinoff of my other thread related to some issues - http://s197forum.com/forum/showthread.php?t=30133 If you sit still and rev the engine, what range of numbers should you see on your A/F? During normal part-throttle driving around town or on the highway (not hot dogging it)...
  18. shanec

    Help! Off-throttle problems - A/F spiking,

    I've got problems when I let off of the throttle. This happens both standing still and while driving - when I take my foot all the throttle, my A/F spikes to 19.9. I've tried tunes from 2 different shops, so I'm pretty sure its not in the tune. After spiking, the A/F settles to a normal number...
  19. shanec

    name that connector

    I've got an electrical connector that isn't plugged into anything. It is round like an o2 connector except this connector sticks out only 2-3 inches from the main conduit/harness that runs around the back of the engine. This connector is right between the firewall and the back of the intake...
  20. shanec

    steel flywheel: Centerforce or Fidanza?

    Does it matter? Fidanza is quite a bit cheaper. This is going on a new Centerforce DFX install...on a 450rwhp/450rwtq car.
  21. shanec

    HELP QUICK with termostat...

    Supercharger install... I've got my radiator hoses disconnected and I've removed the stock water crossover pipe. I need to remove the thermostat, but it is stuck in there. How is it supposed to come out? Afraid to grab with pliers and break something.
  22. shanec

    HELP!!! GT500 fuel pump install

    I'm at the part where you de-pin the green/violet wire and the blue/yellow wire from the old fuel pump connector. Did that, fine. Question is where to do these plug in? Instructions say after these wires are connected, the green/violet should line up with a red/yellow and the blue/yellow should...
  23. shanec

    new whipple intake?

    News copy on the 2010 GT 500 says the whipple intake tube has some kind of resonator that reduces supercharger whine. Might there be a new "whine reducer" whipple intake on the way for the rest of us? Or should I say...for me. I'm one of the few who prefers a quiet supercharger.
  24. shanec

    What does "safe tune" mean?

    In looking to get blown, I want to stay safe. I talk to people about 400-420rwhp and they think I'm silly. "The tune matters a lot more than rwhp", they say. They say, "just get a conservative tune and enjoy 490rwhp" or some such. What's a "conservative tune" or a "safe tune" - and how do you...
  25. shanec

    Diablo Mafia in a conservative Saleen?

    Just got a quote on a Saleen SC setup. Something in the 400-430rwhp range. They recommend a Diablo Mafia among other standard stuff like injectors, BAP, etc. Never heard of a Diablo Mafia. Something to do with MAF sensor voltage? What does this do for me and do I need it?

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Back
Top