Search results for query: *

  1. back n a stang

    JLT Axle catch can

    Just pulled this from my 2012 which I sold. Served it's purpose well. nice piece. 55.00 shipped
  2. back n a stang

    JLT CC.

    It's ready to just plug and play with this simple yet nice piece. $55.00 shipped
  3. back n a stang

    2012 Mustang GT

    Well, I'm selling my 2012 mustang GT. The car has 39,974 miles. I do drive it some so it will go up slightly. I bought this car from Capital Ford of Wilmington NC in October 2011. Car had 2800 miles when I bought it. The car is Black with Black leather seats that have the grabber blue insert...
  4. back n a stang

    Aluminum 1-piece ds

    ***SOLD*** I removed the 1-piece aluminum DS from my 2012 GT to put up for sale. It's a "Shaftmasters" and quality and fitment is excellent. It fit with perfection and was impressive immediately. This is local only sale. I am in Sanford,NC. I will take 475.00 OBO picked up
  5. back n a stang

    Dual aeroforce guages & SOS dual pod pillar

    I have a set of Dual Aeroforce gauges in blue (CNF102) with everything to just plug and play.( Works on the 05-14 ) I removed these from my 2012 GT. I also have the Charcoal dual pod Speed of Sound pillar. No scratches and all is literally like new. My car might have saw 6000 miles of my 20K...
  6. back n a stang

    F/s: Metco uca/ucm

    F/s: (p/n#muc2011) 11+ metco uca/ucm I have for sale the MUC2011 Double adjustable upper control arm and mount. This piece I just took off my 2012 today. It might have 3000 miles. In very excellent condition. 295.00 picked up or plus shipping
  7. back n a stang

    Whats your personal opinion of whiteline LCA's

    I know we all have tried lots of stuff and there is a lot of good stuff out there. Over time opinions change after trying things. I am pretty much a BMR ONLY......knowing I am getting R&D and good stuff and Kelly to talk to if needed. I like that. Only a few other susp. companies I would buy...
  8. back n a stang

    For those using the MUC2011 UCA/UCM on the 11+ please step in

    I am using this and have a question. I am lowered on "K" spring all around with some cut off the Bump stops. The thing is..... I am wanting to try using the hole on the UCM closest to the body but there is possible risk with the Metco UCA hitting the body of the car I think. Has anyone been...
  9. back n a stang

    Transmission shimming...opinions needed

    So, LSS I am wondering if anybody has shimmed their MT-82 up a little for correcting pinion angles? If so how much trouble was it and any downsides or pointers to doing so. A biggie to know is if anybody has done so for this type reason and if so how many positive degrees did you gain and what...
  10. back n a stang

    Concerned...need opinions

    While doing the Diff cover swap to FRPP today all looked good accept this one mild chip and felt like the magnet got the pieces after rubbing my fingers from the little bit stuck to the mag. style plug. Here is couple pic's. What is some of your opinions? Car only has 16,000 miles.
  11. back n a stang

    Need some help PLZ!

    OK....I got a super good friend of mine back in my home town who bought his daughter a 2007 V6 Mustang about 6 months ago. It's a Automatic and has been a good car. It's her first car. He is a Diesel Tech and is mechanically inclined but has a issue he needs help on or hopes somebody knows maybe...
  12. back n a stang

    WTB/WTT 2012GT Black hood

    I am looking for somebody in NC who would like to sell a black 11-12 hood they may have. There was somebody on craigslist a while back with one for damn good deal. should have just bought it. Only looking for one in "EXCELLENT SHAPE" and has to be black. Also would consider trading mine for...
  13. back n a stang

    Hawk DTC-60 pads off boss from track event

    Looking to sale these used Pads. The first couple photo's I show are in MM and not zeroed on my caliper either, so take them for what the pictures are...LOL.... You can see the scale. The others are in "INCH". I can take more pics for interested buyer. The pads are like this: .They have been...
  14. back n a stang

    My opinion of w/e intall of Metco & Shaftmasters.....so far!

    Installed the MUC2011 (Thanks Jason@Hypermotive) over the weekend. Install was not that bad at all really. I went ahead and installed Shaftmasters 1-piece DS also. Took it out for the first drive expecting I may have to rotate the shaft, but the car handled excellent. I don't feel any Vibrations...
  15. back n a stang

    Hawk DTC-60 pads.....

    You guys have ben helpful in this section so I will ask probably my last related question on some road course related questioning I have front and rear Hawk DTC-60 pads. They were used at VIR. The fronts have some life left and the rears look to me like they are close to new. I have not...
  16. back n a stang

    METCO or CHE UCA/UCM on 11+

    Anybody running either of these on their DD? What's your opinion on the NVH and Performance. Asking about these b/c I have had good results and really like the poly/Delrin bushings over the other types out there.
  17. back n a stang

    Ford Boss splitter w/ Hardware

    FORD BOSS SPLITTER that is used for the 10-12 GT/CS lower Fascia with fogs or without fogs. Either way if you have that Fascia. I am selling this local only because it would be long and to much to ship for the buyer. The piece is awesome like new shape. No gash/scrapes or defects. Buyer gets...
  18. back n a stang

    Opinion/knowledge of this...

    Seems I have leaned on you guys a lot with some road course related questions lately. These Rotors came off a Boss that spent some time at VIR and I am wondering your opinion and/or what you would think/do with these? No depth wear at all so just wanted to know would they be worth it for a DD or...
  19. back n a stang

    passenger door window trim motor issue?

    Anybody been in the passenger door of these 11+ GT's? Mine is actually a 12 Prem. 401A pack. but doubt it matters in any way on it. I have from day one noticed my window catches on quick or even just normal opens/closing just barely and only notice due to the sound of the glass kinda clicking...
  20. back n a stang

    MT-82 fluid swapped and got a question.

    I put the Amsoil MTF in today. LSS I had a little mess but all is good. Has anybody ever bent a 90* on something of there choice after adding the 2.7 fluid to see how far below the fill plug the oil comes to? Love to know. If so please share. Make me feel better.
  21. back n a stang

    10-12 mmd matte blk. Tail light trim

    Selling LIKE NEW MMD tail light trim for the 10-12's. All you need is some 3M double sided tape from local parts house. Won't these gone so I take 30.00 + S&H. They don't weigh a pound probably and S&H will not be much.
  22. back n a stang

    *for sale*- tsw wheels

    TSW 18X9.5....mirror cut face. These wheels have only seen VIR and are in like new shape accept one. They were stacked 3 high with the 4th standing up in the 3. With the track and all the rubber and debris sticking to the tire it scuffed/scratched it in few places. The bottom left wheel in first...
  23. back n a stang

    Don't know much about road course racing but....

    I have a friend who is wanting to sell me his TSW 18x9.5 with BFG G-Force R1 auto/race tire. The sizes are 285/35Z/R18. The OD would only be like 25.4 and I'm not much on road coursing. Tires are in great shape. They are high dollar so I'm wondering is this something I will be able to sell...
  24. back n a stang

    Stubby antenna

    Looking for a stubby antenna for 11+ GT.......Looking to get this stock one off my 2012. Wanting the same basic look/material as stock just the shorter.LMK what ya got
  25. back n a stang

    AeroForce Gauges

    I have a couple questions if someone who is exp. with these gauges would please HELP! I just bought a new set and installed. It's 3.8 Firmware version. Jared stated above to use BSB1 A/F to get actual A/F numbers? This thread and what he said was/is from 2011. Just wanted to know if this is...

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Sponsor Links

Banner image
Back
Top