Search results for query: *

I installed an SLP line lock kit in my 05 and it hasn't worked at all. The brakes are all properly bled and the switch is working because it does hold and release the solenoid. It does hold the brakes and keep the car in place but only at a stand still. As soon as I even let out the clutch not...

I'm looking to get my car tuned I live on Long Island the car is a 05 gt with 125shot and full bolt ons with a stock long block. Does anyone know someone in the area who can do a good tune. I use a diablosport trinity tuner which has been my issue finding someone who works with that software...

Went to opening day at ATCO raceway last week had a new PB of 12.12 @ 116.84mph with a 1.85 60' I was very happy with this but now my quest for 11s is in full. I was on a 275/40/17 mickey thompson I think this is what is stopping me right now. I'm looking to get my 60' down below a 1.5 and...

Looking for fuel injectors that will fit a 2005 3v at least 39lb or more PM me with info on what you have. Sent from my iPhone using Tapatalk

Like the title says looking for front springs want a stiff spring rate and rather them be .5inch lower at most prefer stock ride height if possible Also need a short throw shifter for a tr6060 open to anything for the right price Last thing looking for a one piece driveshaft for a tr6060...

Looking for a tko600 PM me if you have one Sent from my iPhone using Tapatalk

As the car sits 3420 with me in the seat. Suspension: Motoblue LCA Cobra jet rear springs Lakewood 50-50 shocks Upr axle tube braces Welded axle tubes 275/40/17 Mickey ET streets 15x4 skinnies Eibach proline front springs Front sway bar removed Stock long block Ford racing intake manifold...

Looking for a JPC or C&L intake manifold Or sheet metal intake manifold Message me with what you have

Looking for a TR-6060 in good condition, prefer low miles but open to anything at this point. I'll take just the trans or everything that goes with it to fit a 2011 5.0 PM me with any info you may have and prices looking for this ASAP

I have an 05 mustang with 4.6 and a tr6060. I started having an issue today out of no where. I drove the car to school this morning and took it to lunch and back no issue whatsoever. About an hour and half later I went to leave and I got nothing. In neutral clutch all the way in turn the key...

Looking for a rear for a 2011 5.0 the rear is completely twisted looking for used or new stock or after market

Really in need of a good set of after market rear LCAs twisted my stock ones at the track. Looking for soild ones my adjustable send me a PM if you had any. Also need an EVAP Canister not the whole system only the charcoal canister Would like to get a JPC or C&L intake mani as well if anyone...

Im looking for a t56 or a tko600 if anyone has which I doubt. I'm also open too the tr6060 for a good price or even a 3650 for dirt cheap. Sick of the car sitting and don't have the funds for the magnum conversion at the moment.

So my 05 is having more issues it now not only has a blown tranny but now I'm getting check engine lights left and right. Sometimes when driving it I get a flashing check engine light. I'm getting codes for slow response on my o2 sensors and I'm getting misfire codes. When I turn the car off I...

I have a set of Mickey ET street II in 295/45/17 for sale. They have made 2 passes at the track and that is it they are basically brand new. They were$235 each brand new I would like to get $375 plus shipping or $375 local pickup for the pair. The pic I have is them on the car brand new I...

So I'm going with a t56 conversion from jpc racing and also doing there return style triple pump fuel system. I plan on using the dw300 pumps and 60lb injectors and going on e85. My question is with the amount of torque I'll be putting down on e85 plus a 150shot will my stock long block handle...

Has anyone done a t56 swap with the next kit they have? I plan on doing one and I was looking at the package from JPC racing but I need to know if the factory drive shaft will work with it. I don't want to spend the money on the other package with a 1 piece of I don't need to right now.

I'm selling a set of Comp Cams XFI stage 2 VSR 127300 cams. I bought them used but never installed them because my plans for the car changed. Asking $350 plus shipping for the set.

Ok so my tranny is completely shot I've tried everything and it's progressively getting worse. Last night I was racing a turbo Honda and I hit 3rd it was very notchy going in like it has been for a while but once it was in gear it was grinding like crazy and wasn't putting down any power the...

I already searched and could not find anything I know there are probably threads on this already but I'm using my phone and can't seem to get to them. Does anyone know how to installing the MSD 2 Step using the clutch switch and not a button? I want the 2 Step to activate in 1st gear with the...

I just got my car full back together and I've been trying to get it ready for the track this Sunday and just ran into an a problem. I have my nitrous system hooked up to the arm switch and to a WOT switch under the pedal. When I hit the WOT switch you can hear it activating with the key in the...

I got a set of 17inch black chrome prostars with Mickey Thompson ET street II 275/50r/17 on the rear with the lug set and when I put them on the wheel doesn't spin freely with the car on the lift. The stock rims spin fine and I checked and nothing seems to be rubbig the away bar is fine the tire...

Where is the dome light fuse located I can't find a fuse box diagram that clearly shows it if someone has one or knows it would really help me out. I know it's a stupid question and probably could find it if I used the search but I'm on my phone and it's easier to ask.

I got a set of Comp Cam VSR stage 2 cams with springs and retainers. I havent done the install yet and was wondering about the Phaser Limiters. American Muscle said I needed them but I wanted to know if I actually need them or are they trying to make me spend more money. What do they actually do...

I need a black OEM drivers side sideskirt or a set of carbonfiber sideskirts to fit 05-09. If anyone has any black side skirt or any carbon fiber let me know and see pics I'm interested need these sooner the better.