Search results for query: *

My car is at original height and with original rims 18 inches (235x50 r18) and when you look at the car you can not see that the rear axle is offset but it looks straight and nice, but if you actually measure, you see that the shaft is offset by about 8-10 mm, but you can not see that. The...

Slipping gearbox check the oil level in the gearbox if there is too little oil in the gearbox, the pump can suck air when turning or braking/accelerating or driving on a slope.

C2280b 39 is just an pass through to C2280c 29 so you kan make an external conection of this to to make it work

the one that sits in the door lock inside in the door

go to the thred in DIY High beam in foglights

The safety switsh to the fuel pump, located at the left of the driver's footwell, may have tripped Have you tried to reset it

You may need to do a window reset, just like on the door windows when they are out of sync

Have you tryed to disconekt the generator

I find it rather strange that no one seems to have investigated the causes of the problem. Some cars work well, so the problem must be solvable !! I've looked at the problem, and found both cause and solution (I think) The biggest problem with finding a solution is that the problem consists of 2...

if you find multipel fuses that has draw than it is probebly an relay that not relases

The alternator is high on the list get an alternator for 2010 they are more durable

No that one is for recirkulation of air the one you are looking for is the lower one on passenger side of the heat box This one dont have an leveling arm but just an hole with splines .

The easiest is to take a screwdriver and jump between the two positive poles on the starter motor, just make sure that the gearbox is in P or N position first.

does it crank if not make sure you monted the starter corekt as well as the eartwire at the motormount

I have done it 2 times already and ar upp for the 3 time when the car returns from winter hibernation I used cheep aftermarket ones that dont last but this time i using Motorcraft hopfully they last longer. I think that the potensiometer that tells how far the swingarm has traveld goos bad and...

After further investigation I may have an aftrmarket alarm Maybe I hawe an aftermarket alarm that have come out of synk . I will try to conekt the battery withe the car lockt maybe it will work Speaking of alarms that have get out of synk A few years ago I had a car with an alarm that you had...

The car was in for airbag replacement on the passenger side 2 days before I put it away, and then they must have been toreing near she SJB, considering how sloppy the "Sweden conversion" at the headlights was done, it may very well be a splice sleeve or power thief behind sjb who gave up. I...

I do not think it has an aftermarket alarm And it has ben in an perfekt dry barn with an konkret flor so No water

I have had the car (GT 2007) parked over the winter and in order for the battery not to discharge, I have lifted the earth cord on the battery. When I was going to look at the car yesterday and plugged in the battery, the horn started howling with a persistent tone that did not stop until I...

https://www.s197forum.com/threads/the-problem-of-refueling.137137/

Swedish is my main language, and the spellcheck on this computer is in swedish so "cut and paste" is my frend trying to spell right.

It cud bee as simpel as an lose ore bad filler cap to get thes codes your link gos to a fuel pressure sensor and thats not the same thing. the one you want is this https://www.autozone.com/fuel-delivery/evap-fuel-tank-pressure-sensor/ford/mustang/2005 The sensor comes as part of a line which...

If there are problems with heat/air flow, chances are it's because one of the accurators sitting on the heater is broken. It is 4 x accurators, which 3 are equal and one dissenting. It is 1 behind instrument clustr, as I understand regulates the air between the floor and the windshield. Since...

I think the accurator behind the instrument cluster is the one not working or you can have missed the controllarm when you monted the acurator

I have a Shaftmaster unit orderd and I just got an trackning message that it is in Malmö Sweden so it shud be here shortly