Search results for query: *

Ok so a friend of my sons has mustang same harnesses. Tested all 4 pins at the fuel pressure circuit WITH the Cm110 connector (which is an in line plug 175e plug to PCM/and the only difference in the 05 and 07 engine harness) unplugged key on Good mustang has return signal, 5v, 5v and...

So I would like to know the voltage readings at the power relay circuit. 87 for me is top right pin which has battery voltage. Can anyone post what all 4 pins are suppose to read with key on them key off please

Engine now cracks with key programmed and synced to 07 engine and 07 pm but does not stay runningrunning. P0685 code along with p2111 and p2104 Key on at c110 connector 2 wires to 3x wires. 2 wires are yellow with blue strip which has power then a green w orange....the other side 3 wires are...

Got my engine to start but dies. P0685 code along with p2111 and p2104. At c110 connector 2 wires not connected yel blue strip power and green orange strip other side 3 wires red . black. And grey. Power at 3 pins of relay with c175b connected. Any thoughts?

Think I'm pretty close with this

Btw both are automatics. Mine is the 2005 dropping in the 2007 Engine.

Yeah he kept the 07 harness on we put it in then noticed the difference. Thanks to TexasBlownV8 I'm going to try to rewire today. Still got instruments cluster to tackle also, finish rerouting the power steering reservoir and connect all tubing so probably not get it all done. Only have sundays...

I left the in cab engine 05 harness in car and the 07 engine harness stayed with 07 engine/trans that's in my 05 now.

As the title says using engine harness from the 07 and the 07 pcm. Problem is I believe is the c110 connector which is in line...main connector to pcm goes to the middle of the pcm and this connector comes off that. Was looking for pin out diagram for both 05 and 07? Also what does this plug...

2x 2005 Mustang 4.0L V6s...automatics...just dropped same engine in my mustang but the middle connector to the ecu has different plug coming off of it then mine did. What to do and/or what is it, anyone have schematics for both or is there a middle man that plugs into them? Any help would be...