Search results for query: *

  1. Jello_08GT

    2008 GT - No Crank, No Start - will start if pushed

    I did some testing and found weird results. with key out ? (light blue/yellow wire) <<< this is the weird part With Key in start stationary wire(light blue/yellow wire)this means it's not sending 12v to the PCM right ? Clutch safety switch black wire (ground G204 is good) I just cleaned it as...
  2. Jello_08GT

    Hard to shift

    08 GT shifter is a little hard to engage when fully stopped, sometimes when I put in reverse I have to go into 2nd or 3rd before it lets me put in the gear, this is same for 1st gear, I can feel car moving if I try to force the gear in. Stage 2 clutch was install wayyy back I can't remember...
  3. Jello_08GT

    2008 GT - No Crank, No Start - will start if pushed

    Can you send me a link on what I need to buy ? Thank you
  4. Jello_08GT

    2008 GT - No Crank, No Start - will start if pushed

    same behaviour, if I jump it will start and then not start so the clutch switch is good.
  5. Jello_08GT

    2008 GT - No Crank, No Start - will start if pushed

    Hey there I have an '08 GT/CS with 120K miles.I've been dealing with this issue for the past couple of years and I'm at loss at this point, it's an intermittent electrical issue and very hard to troubleshoot...from my findings so far I've checked everything: Alternator is good Battery is good...
  6. Jello_08GT

    Hi ! sorry for sudden reaching out but I posted on your post from March about your car no crank...

    Hi ! sorry for sudden reaching out but I posted on your post from March about your car no crank, I have the same issue as you and I'm at loss :/ did you ever figure out your issue ? thanks in advance for your reply
  7. Jello_08GT

    No crank No start full power non battery related

    Hey there, we've got the exact same car – an '08 GT/CS with 120K miles. Weirdly, I've been dealing with the same issue for the past couple of years, and as unfortunate as it is, it's kind of comforting to find someone else going through the same struggle. I've checked everything: - Alternator...
  8. Jello_08GT

    2008 GT M/T not starting

    After further testing, i can't find nothing concrete, it start and then it doesn't. I'm researching PCM pins, and pin 10 is a ground on C175B for the PCM, that one checked out , ohm results and continuity are fine touching the chassis, however pin 47,48,49,50 are also ground for other PCM...
  9. Jello_08GT

    2008 GT M/T not starting

    So I put my Forscan on the moment the car wouldn't start and i got the following readings, anyone knows what this means all I deduct from this is SHORT somewhere. Car started fine after i closed the laptop , go figure. I wanna say thank you again to everyone that helped me so far, never imagined...
  10. Jello_08GT

    2008 GT M/T not starting

    I might have to do all of that, take SJB , PCM, BEC all out and check for corrosion and continuity at all spots, going to be a crazy chase , and I appreciate all the help you are giving me :)
  11. Jello_08GT

    2008 GT M/T not starting

    Exactly what I'm planning on doing , got the ELM with usb and yesterday got it to work on my mac with a Virtual machine , i see that when my car "works" the clutch Pedal Position gets a pressed/depressed reading, waiting for car to not start again and check codes, it is tricky since it's...
  12. Jello_08GT

    2008 GT M/T not starting

    Cleaned all grounds , did a big 3 upgrade with extra ground from battery to chassis and ground to engine block, I went to work , lunch, came back home and parked my car, later had to move my car and it doesn't start, unscrew pcm ground and reseat, starts again :(
  13. Jello_08GT

    2008 GT M/T not starting

    what's specs on that fusible link ? so i can replace it
  14. Jello_08GT

    2008 GT M/T not starting

    Thank you, I bought some eyed terminals and plan on replacing once I get home and check for ohm resistance as well :) , sorry the stupid question but what's a fusible link ? is that the premade wire i just cleaned ?
  15. Jello_08GT

    2008 GT M/T not starting

    that was my next thing, how can I check for shorts ?
  16. Jello_08GT

    2008 GT M/T not starting

    So i went home and cleaned the grounds for the PCM, and boom it started right away....i crank about 6-7 times....put everything together since my interior was half apart, my gf comes home and show her that is fixed and it doesn't start anymore. I remove the ground and put them back and it starts...
  17. Jello_08GT

    2008 GT M/T not starting

    Thank you for that , i didn't know about such manual , I will do all the testing and hopefully i don't have a bad PCM , I will clean all grounds even if they look okay. Thanks again
  18. Jello_08GT

    2008 GT M/T not starting

    I measured for flow when i turn key in start position and i get nothing in the clutch safety switch. If i short the wires manually PIN 30 and 87 the starter spins, so I know that's good. PIN 85 is the one that is never coming alive, that power comes from the clutch switch and i think the clutch...
  19. Jello_08GT

    2008 GT M/T not starting

    nice ! thank you :) I'm really hoping is the PCM diode and computer not sending start enable command
  20. Jello_08GT

    2008 GT M/T not starting

    can you give me a link to the one you are suggesting ? there are so many on Amazon called Forscan
  21. Jello_08GT

    2008 GT M/T not starting

    What kind of scanner i can get to read all type of codes like a dealership ?
  22. Jello_08GT

    2008 GT M/T not starting

    I have not, I do hear a clicking in the SJB it's the Accessory delay Relay , but I thought that was normal ...My next thing to test is the PCM diode and manually test the relays with voltmeter, found this video and it's giving me hope haha
  23. Jello_08GT

    2008 GT M/T not starting

    No clicking , pcm never sends a signal to start I guess, I don't have a scanner for that type of codes I only have a regular scanner for P0XXX CODES I used it and no check engine light codes as well
  24. Jello_08GT

    2008 GT M/T not starting

    Alternator is fine, it's not starting at all.
  25. Jello_08GT

    2008 GT M/T not starting

    Yea same issue , reason why I started replacing stuff ..now that you mention I did have a check charging system before all this happened, I wonder if is related , or 2 separate issues

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Sponsor Links

Banner image
Back
Top