Search results for query: *

Interior lights only are on when the door opens and when the door is open I get the notification on the instrument cluster then the radio turns off. Got into the car today, and the window was working correctly. I didn't do anything like a reset, just turned it on, which I did many times...

Door Jam Switch? MOTORCRAFT SW6121 for the driver's door?

which sensor?

well, I tried disconnecting the battery for 24hrs(just because) and the window is doing the same thing.

Window all the way up when it open in the first two pics. Is it all the way down the the last pic? Sent from my SM-G991U using Tapatalk

The battery drained completely, and I had to open the door with the window fully shut. I've tried the window reset procedure a few times. Press and hold down, once the window is down, continue to hold down 2-5 seconds then press up and once the window is up, continue to hold up 2-5 seconds...

If I can also jump in here with my Rear Axle Noise When driving highway speeds for a while, 30mins or so, I start to hear a high pitch noise. It's almost like a dog whistle noise, I tried to record it but is able to. It mostly goes away if accelerating. At first, it will only be there at...

I change the Fluid out about 4 years / 30k ago. How do you check the fluid level? Like remove the fill plug and stick your figure in there? where the axle vent? I took a video, right behind the tire to see the movement. I can't really see it when I don't it but you can see it in the video...

2005 Mustang GT 151k Earlier in the week, I noticed my rear driver side brake squeaking when braking or turning left. I first check the tightness of the lug nuts, they were torqued to 100 ft-lbs. I then took the wheel off and took off the brake caliper to check the pins to see if they were...

okay, there are only one set of cats, in the first image they are #1 & 2, they are in the engine bay. there are O2 sensors right before and right afterward them (total of 4), the upstream sensors are on the exhaust manifolds and so aren't displayed on these images. I don't have resonators on...

I have one laying around. PM me later so I don't forget to look :)

Call AAA or any other roadside assistance company or maybe a tow truck company. They will come an unlock your car by putting an airbag between the window and the door making enough room to hit the unlock switch with a pole. I been there with the car running. Kids

I am looking to buy the manual linkage bar or buy a shifter with the linkage bar for my 2005 Mustang gt . Any help would be appreciated

Thanks zoom. I have check the clearance between the linkage and the drive shaft. I can fit my hand between them. I have and both of those mods for 5 to 6 years I've had many emails with George, we are leaning towards the linkage bar wearing out. Guess I got into the most wanted section...

Is George the guy that would answer mgws phone or a representative on this board? Sent from my SM-G935V using Tapatalk

I thought this was the original one See how the back bracket is part of the shifter boday From Toco Bill's Thread from 2007 http://mustangforums.com/forum/2005-2014-mustangs/270412-mgw-shifter-installation-with-pics-and-videos.html

This is the one I have Gen

I don't think I have gen1? What's the differences? Sent from my SM-G935V using Tapatalk

I don't think it hitting that rear bracket, I can see were it is clean and dirty on the two Pin that connect to the shifter body. I didn't try to tighten them down, the bolts look really rusty. has anyone ever broken those studs?

7 Sent from my SM-G935V using Tapatalk

When going over at bump in the road it sounds and feels like something is hitting my MGW shifter. At first I thought it was something in the trunk moving around. The shifter doesn’t have any up and down play. The driveshaft doesn’t looking like it is hitting the shifter linkage. I check...

pm sent

I'm in. I'd really like Staggered 18X9/10 2010 GT500 Chrome Wheels with Mickey Thompson tires

Thanks for the video, it lot better than the lmr one. I think I'll replace the control arm with the moog for 87 from rockauto Sent from my SM-G925V using Tapatalk

How hard are they to replace? what did you use?