Search results for query: *

  1. carylarock

    Weird noise..

    At first I thought the Though-out bearing on the clutch. Another post was spacing the clutch with washers if you have recently changed the clutch but I’m guessing not. This could be your timing chain guides because the car is stalling. Or the chain tensioners are loosening oil pressure. If it...
  2. carylarock

    Driveline vibration, out of balance driveshaft?

    I don’t know how low your car is. But it may be pinion angle. Also if you have had your transmission off it is very easy to install the trans mount back in UPSIDE DOWN. This will change the pinion angle. I have a similar issue I am buying an adjustable upper control arm to help dial in the...
  3. carylarock

    Steering issues with 07 GT

    If it was my car I would look into a set of good coil over struts/ springs. Depending on what your goi g to use it for track days or not you will have the adjustability. Shop around like American Muscle.com or your favorite site. Get a good set read the reviews for comfort or track. I like the...
  4. carylarock

    2005 Mustang GT post crash recovery

    New bumper support looks good, so all you need is the air bag?
  5. carylarock

    2005 Mustang GT post crash recovery

    It’s a big job. I changed out the core support on out last race car and ordered it online. You can order all the parts online if you can’t find at the junk yard. It’s a lot of drilling out the old spot welds and rewedding took 2 day will one of my friends. Good luck
  6. carylarock

    Need help

    Yes it may if it’s a late 06 it May not. Ford changed the pin-out for the CVT or VVT from 1 wire to 2 wire in late 06 for the 07 model. I have been struggling with this and found out the hard way. If you have your old one look at the white block that plugs into the fuse block distribution box if...
  7. carylarock

    Just purchased 2008 Mustang GT

    Welcome Rich never know it might turn into full race car!!!
  8. carylarock

    Cam phaser low compression

    Yes it is fictional but the right side is blocked off. 04 intakes was on right 08 intake on left
  9. carylarock

    Cam phaser low compression

    I had a 04 cobra motor in it then I put the 08 back in it
  10. carylarock

    Cam phaser low compression

    So I put the stock phasers in and compression went up to average 135. I bought a different compression checker and went up to 185 average timing is spot on with new chains. Really baffling me. The spring tensioner location is different the stock are back on the new ones are off.
  11. carylarock

    Cam phaser low compression

    Yes timing was good I’m putting the old phasers back on now. New ones look a little different. I’ll keep you 2 posted thanks for the input
  12. carylarock

    Cam phaser low compression

    I have a 2005 4.6 I added the ford performance Ford Performance Hot Rod Performance Camshafts from American muscle, ported the heads and have it Dino tuned ended up with 30hp less. I checked the compression and average 110psi. I just had the valve all regroups and lapped. Just wondering if the...

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Back
Top