Search results for query: *

  1. 06iornhorse

    mickey t street et 26x11.5-17's on rims local pickup dallas only

    SOLD
  2. 06iornhorse

    mickey t street et 26x11.5-17's on rims local pickup dallas only

    Texasb u r next in line just have to wait and see, but im pretty sure dillon is going to pick them up on friday.
  3. 06iornhorse

    mickey t street et 26x11.5-17's on rims local pickup dallas only

    at this time the tires are sold unless dillon falls through on friday
  4. 06iornhorse

    mickey t street et 26x11.5-17's on rims local pickup dallas only

    No prob just trying to pass on some good stuff that I'm not using any more for a fair price. My whole nitrous setup will be coming off the car soon as well, have everything you need for it from 2 bottles, heater, purge, hsw nozzle kit, hsw nitrous controller and autometer cobalt nitrous gauge...
  5. 06iornhorse

    mickey t street et 26x11.5-17's on rims local pickup dallas only

    Sold to dillon pending payment on friday
  6. 06iornhorse

    mickey t street et 26x11.5-17's on rims local pickup dallas only

    Maybe Hillsboro where r u at? On 35
  7. 06iornhorse

    mickey t street et 26x11.5-17's on rims local pickup dallas only

    i do live in dallas and looking for local pickup I might meet you towards van alstyne but that would be my limit
  8. 06iornhorse

    mickey t street et 26x11.5-17's on rims local pickup dallas only

    I have a pair of 17x9 inch bullets w/ 26x11.5-17 with two 1/8th mile passes, then hard times came and had to quite racing. $300.00 local sale only dallas tx. SOLD!!!!!
  9. 06iornhorse

    Help with drag launch

    I dump at 6500 rpms spraying out of the hole
  10. 06iornhorse

    FRPP intake manifold & BBR Stage 2's Dyno numbers

    Hell I'm running 1.5 60's all day long I would say there is tons of improvement to be had on those 60's.
  11. 06iornhorse

    Same/similar to ST 4.6?

    At 75 mph I'm only at about 2700 rpms I average 300 mpg mixed driving and about 345 highway at 70 mph
  12. 06iornhorse

    b.o. pressure plate or slave cylinder?

    It's the slave cylinder I'm on my third one now. The ram pghd's pressure plate is to stiff and blows them out over time so I switched to a p51 and factory pressure plate and got another factory slave cylinder and problem fixed
  13. 06iornhorse

    P0133 code race gas

    simple answer is yes 116 did that and killed my o2s mixed with 93 only after one time tank was empty and mixed 2 gallons of 116 and 2 gallons of 93 and that was all they wrote code showed up a week later. leaded fuel kills o2s stick with unleaded 104
  14. 06iornhorse

    will you be updating the 1/8 mile spread sheet anytime soon.

    will you be updating the 1/8 mile spread sheet anytime soon.
  15. 06iornhorse

    Cam install went perfect - problem out of nowhere

    i say swap the solenoids it takes five minutes at the most and you get a code p0022 its the solenoid. this is what the problem was with my car two weeks ago. do this before replacing the phasers as you really cant tell if they are bad unless the pin holding the spring broke. but at the same time...
  16. 06iornhorse

    Cam install went perfect - problem out of nowhere

    i told you to just do it your not going to hurt anything. and also the vct solenoid sticks shut not open to full retard the cam. i strongly dont thing it was a piece of rtv for the same reason as stated above.
  17. 06iornhorse

    4.56's and spray?

    dead hooking most of the time.
  18. 06iornhorse

    4.56's and spray?

    yes i bogged with 28s and 4.10s i dont bog with 26s and 4.10s. I have a stock long block with cams and shift at 6200. I dump the clutch at 6500 rpms i dont shift at that. 1.5s is my 60fts all day long.
  19. 06iornhorse

    4.56's and spray?

    i have 4.10s and am at 6000 through the traps in 4th gear in a 1/4 with 26 inch tires. i ran an 11.59 with shit for air after it had rained all day in the 1/4.
  20. 06iornhorse

    4.56's and spray?

    6500 rpm dumps spraying out of the hole is pretty violent as i am lifting the wheels 6 to 8 inches off the ground and carrying them about 10 feet on stock wheels and tires in the front.
  21. 06iornhorse

    4.56's and spray?

    wouldnt 4.30's and 28's be like what i have now with 4.10's and 26's?
  22. 06iornhorse

    4.56's and spray?

    I got 4.10's with a 26 now had 28s and it bogged out of the hole with them dropped back down to 26's and no more bogg and I don't spin if track is peeped good at 6500 rpm dumps
  23. 06iornhorse

    4.56's and spray?

    I have gone to the quarter only a hand full of times I do prefer the 1/8th, at this time I am running a 26x11.5-17 but am about ti get 15's and get taller rolling stock for them. I know the car will love the gears on a motor pass but I like to spray from start to finish. So I guess I would be...
  24. 06iornhorse

    4.56's and spray?

    how will the combo work do yall think. I was wondering if any one else has done it and how it worked for them or is it just to much gear. oh im spraying a 100 shot.
  25. 06iornhorse

    Help please p0012 what could it be

    Dealer

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Back
Top