Search results for query: *

  1. race4food

    PBH body harness coyote swap

    You use a coyote transmission harness. All of that including the electric steering connectors are located in that harness. The PBH is strictly for the body harness, then the engine harness is separate ass well.
  2. race4food

    My cheap as dirt Coyote swap.. 06 GT 500 to the wheels for $5000

    ?YES.
  3. race4food

    Coyote swap TR3650 speed sensor??? What to do?

    Did what juice said. Bought a new pigtail for the 3650 and connected to the VSO and the second connector and left the 5v just not connected. now have a speedo and just need to adjust With Forescan as the sucker is low.
  4. race4food

    Gas pedal not working car starts, idles

    All since 2005 actually. 05-09 has a different connector and the 11-18 are 6 pins. Found that the 11-16 6 cylinder and 8 cylinder use the same pedal. Only difference is plain black or the extra $100 for the aluminum insert. You can swap the rubber/metal pad from one to the other it only has one...
  5. race4food

    Gas pedal not working car starts, idles

    Ran FORESCAN and the tests P1575 pedal position out range P2138 Pedal position sensor voltage So essentially the pedal took a crap, pulled the pedal and tore it apart and there is nothing inside. The true sensor portion is enclosed and must be a...
  6. race4food

    Gas pedal not working car starts, idles

    So today I get in the car and after start up and idle the gas pedal stopped working. Car will idle and the first time after start I hit the pedal and it will rev once and that's it. I kill the car, restart, let idle and I can rev once and then no pedal response. WTAF?
  7. race4food

    Check charging system and no EPASS response

    So the gauge does not get signal through canbus? Any ideas on how I might get it running through the cluster?
  8. race4food

    Check charging system and no EPASS response

    She runs great. just no reading on the gauges. Gen1 sending unit, connected to the harness. I thought the signal went through the can bus. Juice how are you running yours?
  9. race4food

    Check charging system and no EPASS response

    The fuse was blown but the break was so small couldn't see it. So final issue with the swap is still not getting oil pressure gauge to read, I'm using a gen1 sensor with the gen1 harness.
  10. race4food

    Check charging system and no EPASS response

    So last night I got a Check Charging System/Battery light and there is no input from the Electric Steering. So to say its light fighting a dump truck turning is mild! Checked the voltage and its 13.8. Does Oreilleys on car check for Amperage output and is there a minimum for the EPASS to...
  11. race4food

    Anyone running the Power by the hour 3v Coyote harness?

    Engine did not blow up, just a fuel line that refused to stay in place. I got absolutely disgusted chasing BS ghost codes in the EEC all to be a bad line in the pickup, so I put a cover over her and just left it.
  12. race4food

    Anyone running the Power by the hour 3v Coyote harness?

    For the brake and the clutch you really just need to connect the PBH harness positive wires in place of the factory harness positive wire on the brake and clutch switches. I refuse to cut any chassis wires so I got a pair of brake pigtails and clutch connectors from a junkyard, then de pinned...
  13. race4food

    Anyone running the Power by the hour 3v Coyote harness?

    Oval sports are you up and running? I got mine wired out and running like a champ. It was actually quite a bit easier than I made it out to be. I had the ignition/ power wire to the wrong pin out and a reversed OBD2 connector wire. Also thought I had a bad EEC because of no communication. After...
  14. race4food

    Coyote dead with p0011 and P2107 please help!

    Gen 1 coyote I took the car out for a test drive and during the drive it was surging and running generally bad. Then it flat out died and will not start at all. Codes were P0011 (cam a too advanced) and P2107 Throttle body motor bad I replaced the throttle body motor and the intake cam VVT...
  15. race4food

    Coyote swap TR3650 speed sensor??? What to do?

    appreciate the help juice! Ran her for a good bit to purge the cooling system and check for leaks etc today. Man she is freaking LOUD even with 2 chamber resonators added in.
  16. race4food

    Coyote swap TR3650 speed sensor??? What to do?

    The speedo is supposed to work through the canbus is what I'm reading.
  17. race4food

    4.0 s197 coyote swap wiring.

    adjust the routing of the cables.
  18. race4food

    Coyote swap TR3650 speed sensor??? What to do?

    no there is no provision for the speed sensor.
  19. race4food

    My cheap as dirt Coyote swap.. 06 GT 500 to the wheels for $5000

    I had a hell of a time finding those schematics even through the ford manual. What is the deal with your solenoid? Its on the same harness as the electric steering.
  20. race4food

    My cheap as dirt Coyote swap.. 06 GT 500 to the wheels for $5000

    They are the 2015 Truck cams. The GT has the same specs for the cams but the timing gear is different. Again Boss cams are $450 from ford, if you want to buy new and not shop for take outs, that are all over FB marketplace.
  21. race4food

    My cheap as dirt Coyote swap.. 06 GT 500 to the wheels for $5000

    Yes. His original motor was swapped under warranty into his GT using his original intake and headers.
  22. race4food

    My cheap as dirt Coyote swap.. 06 GT 500 to the wheels for $5000

    I'm going to do a how to with pics shortly but I ran the fuel pump wire directly to the pump. It simplifies things and gives a #10guage wire for no voltage drop.
  23. race4food

    Coyote swap TR3650 speed sensor??? What to do?

    The swap is finished and running but my so called "solution" for the speed sensor is not working. What do I use for a speed sensor for a Gen1 control system using a TR3650?
  24. race4food

    My cheap as dirt Coyote swap.. 06 GT 500 to the wheels for $5000

    Because Gen2 timing is not compatible with gen1 control set, period. The gen1 computer can not control the phasers nor read the inputs from the sensors. The Can-bus of Gen2 uses a completely different protocol.
  25. race4food

    My cheap as dirt Coyote swap.. 06 GT 500 to the wheels for $5000

    the ONLY firing order difference is the 18+ F150 ALL other coyotes are the same.

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Sponsor Links

Banner image
Back
Top