Search results for query: *

  1. JesseW.

    Spring Rates

    a good set of shorten struts sure cured a lot of my ride problems, with a 600f 250r spring rates. for you metric guys thats around 10.7kg and 4.4kg. i will probably back off the fronts to 550 or 500 pretty soon since i have an s2000 i autocross now. linear rate springs are relatively cheap...
  2. JesseW.

    Eibach Multi Pro R2

    google?
  3. JesseW.

    First Autox in the Mustang

    i'm not sure what to say about that. if you are running camber bolts, bring them back a bit to get the tire away from the strut, then try to get the camber back from the plates up top. or wheel spacers. probably won't take much
  4. JesseW.

    First Autox in the Mustang

    +43 and your hitting the strut? are those eibachs that big? how much camber do you have in it? 295/30/18
  5. JesseW.

    First Autox in the Mustang

    what offset are those apex wheels? 48? 50? my AMR wheels were really close and are 48. i solved with a 7/32(about 5 mm) plate spacer i got from carquest that day. made by mr. gasket http://www.summitracing.com/parts/mrg-2370/overview/ those goodyear f1's are close to junk.
  6. JesseW.

    Prothane front control arm bushings install question....

    i did this one mine, an air chisel makes taking out the front metal bushing parts a lot easier. will drive it right out. i woundn't put it in a press as i remember someone on this board bent thier front lca doing that... the rear one, drill holes in it to relieve the liquid. heat, spin the...
  7. JesseW.

    Vorshlag 2011 Mustang 5.0 GT - track/autocross/street Project

    http://www.maierracing.com/ they have a kit. 1.5" wider front fenders, 2" wider rear
  8. JesseW.

    Towing Tech Thread - Car Transportation

    the problem with rentals is they are all slightly different, even among the same brand. it sucks trying to figure out how to reload/unload the car everytime you have to go somewhere. it takes me about 10 min to load and 5 to unload because i have a routine down now
  9. JesseW.

    Fays2 Watts Link...Install Help!!

    for future reference, when installing, with axle at ride height and centered under the car.... 1. put the passenger side clamp on all the way against the vent tube. do not move again 2. adjust your passenger side bar with threads as per instructions 3. attach bar to clamp and propeller, prop...
  10. JesseW.

    Towing Tech Thread - Car Transportation

    i have a 16ft open trailer, wood deck with a 2ft dove tail. bought it last year brand new for $1800. (got a great deal) 1. put two 10' 2x10"s screwed to the deck for the doors to clear the trailer fenders. i screwed some scrap 4x4 to the deck in front to act as a stop/chock. 2. my car is...
  11. JesseW.

    Bolt in/Weld in Roll bars

    thanks terry, i talked a local scca tech guy and he was concerned about that when i showed him pictures where the roll bar was in relation to the seat. the rule reads that the helmet must be 2 inches below the top of the hoop and the hoop no more than 6 inches behind the driver. when are...
  12. JesseW.

    Mustang Suspension upgrade part out

    Those are it. i pm'd you back
  13. JesseW.

    Bolt in/Weld in Roll bars

    will the MM bar meet the SCCA Time trial roll bar rule of being 6 inches or less from the back of the helmet? there are a couple of time trials and hill climbs I'd like to try and I'm not sure it does.
  14. JesseW.

    Mustang Suspension upgrade part out

    Springs Pending
  15. JesseW.

    Suspension Help! - Spring Choice

    go ahead and buy my eibach prokit springs when you get the strut mounts.... $125 is damn cheap for a set of springs. they are also the same springs that came on the 07-09 Shelby gt's
  16. JesseW.

    Mustang Suspension upgrade part out

    PM sent lcplpunk
  17. JesseW.

    Mustang Suspension upgrade part out

    strut mounts taken off at 35,000 miles, didn't pop or make any sounds when I took them off. I went to caster camber plates. they fit the koni's and stock struts, not sure about others. should be fine as long as they are stock replacement
  18. JesseW.

    Mustang Suspension upgrade part out

    I have the following parts for sale because I put some jri struts and a watts link on the car: Koni Sport front Struts SOLD 15,000 miles Eibach Pro kit lowering Springs SOLD 10,000 miles UMI on car double adjustable Panhard bar (rod end/poly combo) SOLD 15,000 miles...
  19. JesseW.

    Will a Fays2 and a Whiteline rear sway work together?

    it works with the BMR relocators I run. I had to shorten the swaybar bolts a little and grind the head of the LCA bolts a little but everything clears. if your not afraid of doing a little work everything it works great.
  20. JesseW.

    Will a Fays2 and a Whiteline rear sway work together?

    if you offset your front strut, cortex carries these 10.5's that will fit under the front and rear without sticking out at all. (i'm gonna get a set when i can afford it) http://www.cortexracing.com/shop/enkei_pf01/ they are a different offset from the normal PF01's and as far as i can find...
  21. JesseW.

    cortex watts link

    + juan
  22. JesseW.

    cortex watts link

    i bought a Fays2 a few months back and like it a lot. from a price, ease of install, quality and performance standpoint i think it is top notch. it just doesn't have the Bling factor the cortex or whiteline units have. but it does have way more adjustability. from a performance standpoint, a...
  23. JesseW.

    Hood clearance issues

    love the way that hood looks, really glad i didn't buy one now....
  24. JesseW.

    Fuel Issues at the Track

    my car was fuel starving in turns at autocross. the in-tank fuel filter on the pump was clogged. changed it and fuel issues went away.
  25. JesseW.

    Opinion/knowledge of this...

    made that mistake once. no more drilled/slotted rotors for me. cracked a set of front rotors in 4 autocross events..... the blank rotors have lasted me well over a year. street bling only.....

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Back
Top