Search results for query: *

  1. fdjizm

    What's this guy called?

    As luck would have it I bought an SJB for my car that is programmed for halogens I was going to bring it to the dealer to make it HID (this was when my SJB was getting wet years ago) might throw that it but where the hell do I get the headlight harness? Lol
  2. fdjizm

    What's this guy called?

    True, I mean it works so I may just tuck it somewhere else. Really wanted to change the HID's because those fuckers are $800 each and don't even work as well as some nice projector kits. But I have to tell the SJB that it has regular lamps and then maybe change the harness don't even know. Why...
  3. fdjizm

    What's this guy called?

    You bastard, well it works its just the housing is all fucked up an I won't be able to mount it how it was. Might just double stick tape it somewhere. My car came new with the OEM HID's an I need new ones but they are like $800 each. I wanted to just go with the normal housings an run LEDs but...
  4. fdjizm

    What's this guy called?

    ahh OK thank you! I do have those, explains why some cars don't have it. Guess it did have two at some point. Ok so it's called "Auxiliary Relay Box 1" and can't find it to buy, gonna check some dealers. thanks!!
  5. fdjizm

    What's this guy called?

    Yea mine always had the one relay though and not the other. weird!
  6. fdjizm

    What's this guy called?

    Hey fellas, hope all is well! Getting back into my Mustang thing again! Need to replace a few parts after a shitty accident. Anyone know what this is called and what it does? There is one relay inside of it. Thanks in advance, been searching all kinds of terms and can't find it. Miss you...
  7. fdjizm

    Finishing up a coyote swap

    I'll check it out, thanks!
  8. fdjizm

    Finishing up a coyote swap

    nice, thanks! I stopped following a bit ago but figure by now they have it. special order? don't see it on the site.
  9. fdjizm

    Finishing up a coyote swap

    Does power by the hour already make a quick swap harness for our cars?
  10. fdjizm

    Another Mustang crashes into wall trying to show off.

    Looks like a brake failure to me, recall!
  11. fdjizm

    Drag suspension handeling on the street

    How so? I've had my FSB off for almost 10 years now and didn't notice it being gone.
  12. fdjizm

    Winter Refab of Turbo kit

    Looks beautiful!
  13. fdjizm

    Rough RPM's after two step?

    Yea makes sense, well I figured it out and it wasn't even a problem. Put new plugs in SAME THING, well the only thing I changed that made this happen was putting the 2 step at 2500 to test it quietly. Apparently the ECM throws a cel for using the twp step at that RPM. So I raised the two step to...
  14. fdjizm

    Rough RPM's after two step?

    HAHA, yea only thing I've ever blown up is mufflers with it. Sooooo I went ahead and bought no coils, I don't know where I got that they can wear out but maybe they can't? Anyway new coils and it still does it! so that's good now I have a set of spare good coils lol. (waste of $300) So I...
  15. fdjizm

    CPR Turbo Someday?

    Ahh hope, I remember when I had that for other humans. :roflmao:
  16. fdjizm

    CPR Turbo Someday?

    That's nuts, hope you get your money back. I don't see anything legit about waiting 3 years for anything you paid for at all.
  17. fdjizm

    Rough RPM's after two step?

    Probably about 20k so far.
  18. fdjizm

    Rough RPM's after two step?

    Hello! been searching but can't come up with this specifically. I am thinking coil packs are getting tired but need a second opinion. I have a wotbox and when I hit the two step lately the car sounds and feels rough in the rpm's after I get off the two step. it clears up after a few seconds but...
  19. fdjizm

    Let's get this forum going again...

    :roflmao: yesssss
  20. fdjizm

    Let's get this forum going again...

    Imma let you finish, but the 05-09 is the best Mustang body of all time.
  21. fdjizm

    Broken Exhaust Stud Shop charging 400

    I heard you can also weld a nut to the broken stud, but that may require a bit of finesse these guys don't sound like they have.
  22. fdjizm

    Broken Exhaust Stud Shop charging 400

    Might be a big job for an easy out, when I did this years ago I hot the studs with a blow torch and PB blaster before attempting to move them. I got lucky and they popped right off though. It would have been a $100 job if the studs didn't break but I am sure they are now calculating the labor...
  23. fdjizm

    Lifting at high speed

    Yes, I was looking for a nice piece of ABS I can cut up to make the front bumper section all flat. Shouldn't be hard only thing is finding the damn sheet.
  24. fdjizm

    Lifting at high speed

    https://www.tascaparts.com/oem-parts/ford-splash-shield-ar3z6c038a
  25. fdjizm

    Just got this beauty

    Congrats on the ride, if I got another mustang it would be a 2013-14!

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Sponsor Links

Banner image
Back
Top