Search results for query: *

  1. GallopingFord

    2020 Ford Explorer ST

    Wazzzzzzzzzzzz up! Dave texts me and I shall awaken. They should be arriving summer. One of my first 2020 Explorer's is an ST trim due in at the beginning of June.
  2. GallopingFord

    2018 Bullitt Mustang

    The only late model S550 Mustang I'm looking to purchase. The Vette/GT350/GT500 don't do it for me, but a Bullitt... always. I sound like a goofball, but the Bullitt is just understated cool factor to me. Just needs level 2 performance package wheels + splitter and it's perfect.
  3. GallopingFord

    19x11 Offset

    ^ What Jason said. I did remove mine when I installed my 20x12 rears. I did it by using a spot weld cutter and completely removing the bracket and then painting over it so it never looked like was there. Then I installed the Zombeast bumpstop relocation kit. I've now done this twice when I had...
  4. GallopingFord

    19x11 Offset

    Those look absolutely killer.
  5. GallopingFord

    19x11 Offset

    The angle and the height of those cars doesn't really help to see.
  6. GallopingFord

    19x11 Offset

    Thanks. I accidentally mistyped. It should be 50mm to mid 50's for flush. at 56mm you are nearly as flush as my 20's are.
  7. GallopingFord

    19x11 Offset

    19x11 should be 50mm to mid 50's on a 325/30/19 IMO. I run a 20x12 +58 on a 315/30/20.
  8. GallopingFord

    What have you done to your house today

    With my townhouse that I sold earlier this year it tested over 4 and I had to install a mitigation pipe outside (mirrored the downspouts which was a nice touch). It cost me $900. Our new house was around 3.8 so eventually I will install another system. It's an annoyance, but it is what it is.
  9. GallopingFord

    08-09 GT500 Headlights

    Looking for a set MINT with no broken tabs.
  10. GallopingFord

    Engine Noise

    Sounds like the coyote tick to me. My fiances brother had a '14 that did it the same way - really bad with AC on and still noticeable with it off, but not as bad. Just replied to your PM.
  11. GallopingFord

    F-150 New Take Offs - Wheels/Tires, Grilles, Lights

    Updated.
  12. GallopingFord

    F-150 New Take Offs - Wheels/Tires, Grilles, Lights

    All sold that was originally listed here. I do normally have F-150 and Super Duty take off's in-stock - if you are interested just send me a PM.
  13. GallopingFord

    Why are used parts so expensive?

    Doo it
  14. GallopingFord

    The PIC WHORE CLUB!!! Knock before you Enter!!!

    Deep Fried Treats
  15. GallopingFord

    2008 "tigermachine II" Bullitt Mustang build, Pics & Video on Post #518 ...

    That's funny the video was cut to 7:07. I think with the Hellcat, that is right way to go. The biggest issue I had with the normal market Challenger was the weird wheel well creases. I do have to admit though, it's a big pet peeve of mine to say "Widebody" when it is in-fact just stuck on...
  16. GallopingFord

    Why are used parts so expensive?

    Keep your eyes peeled on eBay. I bought my 10-14 mirrors with the blind spot corners for $90/pair. I forgot what it looked like with truck mirrors. Lol
  17. GallopingFord

    2008 "tigermachine II" Bullitt Mustang build, Pics & Video on Post #518 ...

    Yeah, they are a pain... but damn they look good cleaned up for 5 minutes. Lol
  18. GallopingFord

    What have you done to your house today

    What? My b. Took me a total of a 30 min to install including my 6 pack pre-game.
  19. GallopingFord

    2008 "tigermachine II" Bullitt Mustang build, Pics & Video on Post #518 ...

    I don't think I've ever had an easy dealing when selling my cars, but I just shrug it off. But nothing tops dealing with the diesel truck buyer... especially if you have something unique. When I was trying to sell one of my trucks - my '96 F250 7.3L ... I had done a TON of work to the truck...
  20. GallopingFord

    What have you done to your house today

    Installed a new state-of-the-art toilet flush lever. Nothing beats the touch of a solid flush handle. Also begun the restoration of my fiances' porch swing. It's a little more than 100 years old, handed down from her family for our home, so I'm trying to be as delicate as I can to remove all...
  21. GallopingFord

    2008 "tigermachine II" Bullitt Mustang build, Pics & Video on Post #518 ...

    Terry, not sure if you are 100% set on Gateway Classic Cars, but I forgot to mention to you this guy - I am going to use him to assist me with selling my Corvette. After the last two months I'm at my whits end dealing with seasoned corvette owners who are scaling pretty high on the asshole...
  22. GallopingFord

    Critique/Give Opinion of My Build Plans

    If you love the car you have, enough... build it. If not, sell it and buy a GT500. I've been running around with my 5.4L GT500-Swapped Bullitt for about 4 years now. I love it. I enjoy the build and I enjoy driving it more now. LT's, cams, TVS blower, plus then some later I'm enjoying my 800~hp...
  23. GallopingFord

    Wideband install ideas

    I'm using Aeroforce interceptor gauges so I just plug into the OBDII port for power. Organized the wiring behind the glove box. I tucked the module right under the carpet near the bulkhead. Just take your time to do it. I'm OCD so I reorganized the wiring about 2-3 times before I was satisfied...
  24. GallopingFord

    2008 "tigermachine II" Bullitt Mustang build, Pics & Video on Post #518 ...

    Good to hear Terry. I can't help but to think your two possible picks are at the opposite end of the spectrum. Lol The TTRS is a precision blade and the HC is as precise as a sledge hammer. I know you like anything Muscle/retro... but where is the smaller Audi coming from?
  25. GallopingFord

    What have you done to your mustang today?

    I've used the Turtle Wax Black on both of my black Mustangs and it's done nothing but keep it perfect - it's a really good product. If I have more time I do use CG Butter Wax as well.

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Back
Top