Search results for query: *

Just a odd thing that happened to me, I had the high side of the fans burn out. very odd. the car overheated in traffic. I drove it home after it cooled off. I checked the fuses and relays. all good. the fan spun freely but did have the " the magic has left electronic part" smell to it. also...

hey all, Just checking to see, I haven't really seen any posts on here about 9" rearend swaps. I am looking to put a decent 9" rearend in my car soon. I know about the beef ups with the 8.8, while stout, dollar for dollar and strength wise, a 9" is a better option. post up if you have any...

well learned today that if you purchase the detroit truetrac, the instructions are kinda vague for the spacer, it says to use the spacer with the grove( well they both have a grove, WTF?). I called eaton. they said you want to use the axle spacer that is 21.3x mm and has the deeper groove...

broke the car on the first of the month on a test and tune, finally tore into it today, here's the snapshot. stock 3.73's, (has the upgraded diff stock ,2011 brembo 3.73 package). I've beefed up the rear end with a che axle brace and the FRPP rearend girdle with bearing supports. I was running...

looked for a drag wheel picture setup thread didn't find one, here's mine: MT 295/55 15 ET drags & M & H 185/55 17's on weld RT-S' black

SOLD!

SOLD!

TIAL BV 50mm Blow off valve SOLD! Tial BV series 50mm BOV, has a 3 inHg vacuum spring in it right now for a supercharger, Tial will change it out for free, you would just need to contact them for the change out.

dyno run at B & R perfomance here in OKC: power modification on car: stock block, M6, mcleod twin disk RXT clutch w/ billet steel FW, shaftmaster 1 piece DS, KB 2.8LC, 8 rib upgrade kit, 168mm TB, 3.5" upper pulley, stock lower, Evolution performance 75lb flow matched injectors, KB BAP, BBK...

any vendors here real recaro seat distributors? looking at buying a set of sportster CS's and the mounting hardware. thanks!

I believe for did the evap system this way from 2008 on up. correct me if I'm wrong. I have a kenne bell so the engine section is a little different. the EVAP solenoid would just get capped off on the intake manifold vice on my KB intake manifold. there is no performance benefit other that the...

Here's a video of me starting up after the tune was installed http://www.youtube.com/watch?v=-FIlSvSUq5U&feature=player_embedded

I installed the FRPP rear end girdle M-4033-G2, and was wondering how much fluid needs to go in the rear, I have put 4 quarts of 75-140 in it and it still isn't up to the fill plug like the instructions says to fill it to. WTF?

I'm in the process of installing a kenne bell 2.8LC and with it I am putting the 8 rib setup. I am having a issue getting the stock crank pulley off, WTF? I've never had issues getting a crank pulley off, especially on a newer vehicle? is there anything I need to get? I've already broke a harbor...

noticed that the aluminator for boost comes with a billet steel oil pump now. I don't remember it coming with that before. is this a new change for the crate engine? I don't think this is the aluminator XS? anyone? http://www.fordracingparts.com/parts/part_details.asp?PartKeyField=12763

Hi I recently purchased a set of used 555-8135 - Steeda Heavy Duty Upper Strut Mounts for my 2011 GT. I was wondering if you had the instructions in a pdf format for installation. they seem pretty simple to install, just wanted to make sure there wasn't a left or right side for installation...

Anyone have the Crank position relearn done with a tune already in the car? I did a search and didn't come up with anything either way.

anyone else own aquariums? I just bought a 135 gallon 72" x 18" x24". haven't had one before but I'm gonna make this an african cichlids mostly since they are a hearty species(ie harder to kill for the newb). I am building my own stand and cover for it and am piecing the thing together for all...

Hello all, looking for real hoodpins for my hood. I have a HO fibertrends 3" cowl and want to put a set on for safety, and can't seem to find a set. anyone know who makes or sells them for 2011's?

looking to do some calculations for my blower... Never mind, found the info. with Procharger D1-SC, the crank pulley supplied by Procharger's diameter is 7.65. to calculate blower RPM here is the math: Impeller RPM= (crank pulley DIA / supercharger pulley DIA) * Internal impeller ratio *...

anyone know of reputable tuners in the DFW area. looking to get the car with the Procharger dyno tuned.

Like the title says low mileage 2010 Motorsports color, 3,962 miles, DTC/ABS, shift assist,factory slipper clutch. warranty good till may 2013, new tires. garage kept, excellent condition! oil changed every spring and chain cleaned, lubed, & adjusted every 400 miles. best bike rated last 3...

SOLD!

looking for a MT-82 transmission in good working order. A new one can be had for $2273, here: http://texasmotorsfordparts.com/parts/2011/FORD/MUSTANG/GT/?siteid=214462&vehicleid=1446394§ion=MANUAL%20TRANSMISSION&group=MANUAL%20TRANSMISSION&subgroup=MANUAL%20TRANSMISSION&component=TRANSMISSION...

Ok, it's been established there are issues with the MT-82, does anyone know if anyone has come up with a beefed up rebuild kit for it or just arebuild kit in general?